
HP Tuners MPVI4 is a vehicle interface for diagnostics, data logging and custom calibration using VCM Suite 5.2 or newer. VCM Scanner reads diagnostic information and logs available channels; VCM Editor reads, edits and writes supported calibrations. TrackAddict is a separate mobile telemetry and video app. Licences use credits sold separately, with costs depending on the application and controller.
The manufacturer describes standalone data logging, USB-C, Bluetooth 5.2 and Wi-Fi intended for a later firmware update. Its published hardware summary includes a dual-core 1.7 GHz processor, 1 GB RAM and compatibility with the Pro Feature Set and PROLINK+. MPVI4 is primarily an OBD interface; supported applications include selected European as well as American and other vehicles. Check the specific application and required connection method rather than assuming all ECUs from a manufacturer are supported. HP Tuners: MPVI4.
Supported vehicles and controllers
HP Tuners publishes a complete supported-vehicle and licensing list. The examples below were checked on 17 November 2026 and are a guide, not the complete list. The manufacturer can change coverage, device requirements, software versions, services and credit costs. The list may redirect to HP Tuners' regional homepage; if it does not open, use its vehicle-support link or contact HP Tuners to confirm the application. Match the model year, engine, market, ECU and calibration to the current listing before purchasing or working on a vehicle. Some listed applications have restricted functions or require particular interface generations; ECM and additional controller licences can be separate. The official list concerns VCM Suite, and support in TDN may differ.
- GM – Chevrolet and GMC: examples include 2017–24 Camaro 6.2 and selected 2017–23 Silverado/Sierra 2500 and 3500 6.6 L5P Duramax applications with E41 ECM. HP Tuners identifies E42 ECM in listed 2024–26 L5P Silverado/Sierra 2500 and 3500 applications. It also identifies E90 for certain 2019–21 Silverado/Sierra 5.3 L84 and 6.2 L87 applications, and E99 for the 2019 Corvette ZR1. Controller access, upgrade and licensing requirements vary by year and module; transmission tuning is separate. L5P controller groups; 2026 E42 applications; locked modules.
- GM – Cadillac and Holden: the list includes 2022–26 Cadillac CT5-V Blackwing 6.2 LT4 and 1999–2005 Holden Commodore 5.7. Verify the listed controller, device and service conditions for each vehicle. Supported vehicles.
- Ford: HP Tuners identifies the MG1CS036 ECM in supported 2024–25 Mustang GT 5.0 including Dark Horse, 2021–25 Bronco 2.7, and 2022–25 Bronco Raptor 3.0 applications. Its announcement also lists 2021–23 F-150 2.7, 3.5 and 5.0 applications. Check the vehicle and ECU individually; model-year and engine combinations are not interchangeable. Ford MG1 support announcement; Ford list.
- Dodge and Chrysler: examples in the manufacturer list include 2008–23 Challenger with listed 3.5, 3.6, 5.7, 6.1 and 6.4 engines, and 2015–24 Challenger Hellcat 6.2. A grouped year/engine row does not establish that every engine was offered in every year or market. Many 2015-on Dodge, Chrysler, Jeep and RAM PCMs require a service; HP Tuners states exceptions for 2015-on Viper and certain 2014–19 EDC17C79 applications. Its service page also specifies a Smart Access cable for 2018-on models. Confirm the exact application and current service instructions. Stellantis list; Dodge PCM services.
- RAM: HP Tuners identifies selected 6.7 Cummins trucks from 2013–18 with CM2350 and 2019–24 with CM2450 for its switch-on-the-fly application. Check the exact truck and calibration, and any required controller service. Cummins application details.
- McLaren: HP Tuners lists the 2018–23 720S and 2023–25 750S 4.0 twin-turbo with Bosch ME17.8.33. The manufacturer's service page also lists selected Senna, GT, Elva and 765LT models. Its stated requirements include MPVI4, supported VCM Suite and a send-in upgrade of the original ECM, which must return to the same vehicle. On 17 November 2026 the ECM licence was listed as 30 Universal Credits and transmission tuning was not supported; check current requirements and cost. McLaren ME17 ECM service.
- Selected European and Japanese applications: the current list includes the 2017–26 Alpine A110 1.8 M5Pt with BED501/BED50E, 2016–26 Audi RS3 2.5 TFSI with MED17.1.62, and 2009–20 Nissan 370Z VQ37VHR. The Alpine row specifies MPVI4; Nissan controller restrictions also apply. These are individual examples, not blanket support for the make or ECU family. Supported vehicles and device legend.
Workshop and tuning workflow
- Identify the vehicle, controller and calibration; confirm interface, licence, software and any service or cable requirements. Read and record diagnostic trouble codes before a vehicle read, and investigate faults before using performance logs as tuning evidence.
- Capture an initial VCM Scanner log with appropriate channels. Use a stable, charged power supply for the manufacturer's read/write procedure and save the original read separately before changing it. Only write a file appropriate to the vehicle and controller.
- Make controlled calibration changes and compare them with the original file. Log the resulting behaviour and verify fuel, knock, temperatures, drivability and applicable emissions requirements using suitable instrumentation. Available channels and parameters depend on the ECU and calibration.
HP Tuners: getting started with VCM Editor; reading a vehicle; getting started with VCM Scanner.
Scanner logs, histograms and tune files
Connect to the vehicle to create a profile, then select channels appropriate to its controller and the question being investigated. A display or graph layout does not itself add the underlying channels; add them to the channel list and save the configuration for reuse. HP Tuners describes graph panels for collecting data against table axes and a separate time chart for seeing how signals change through a pull or transition. Scanner configuration; layouts.
Histogram data can be misleading when transient operation and unsuitable samples are mixed into a steady-state calibration. Consider operating conditions and sample coverage, and verify channel units and table axes before applying data. HP Tuners supports copying graph data with axes and Paste Special operations in compatible tables; choose an operation appropriate to the measured quantity, review the result and validate it in a new log. An independent discussion on histogram filtering illustrates why driving conditions and transients matter; see also HP Tuners' table editor guidance.
Keep the vehicle's original read and work from a file appropriate to its controller and operating system. HP Tuners says repository files uploaded by other users are for reference and should not be licensed or flashed to the ECM: an incompatible file can damage the controller or consume credits. Replacing a module or changing its VIN or OS may also require a new licence. HP Tuners: licensing and repository files.
Platform-specific calibration techniques
- GM virtual VE: certain GM calibrations store volumetric-efficiency coefficients. VCM Editor's Virtual Volumetric Efficiency editor presents these as tables; accurate injector data is a prerequisite. Select the applicable cam and operating mode, calculate coefficients after editing and validate against suitable logs. HP Tuners describes temporarily using speed density when calibrating a MAF-equipped application and restoring MAF operation afterwards. This procedure is calibration-dependent. Virtual Volumetric Efficiency.
- GM E38/E67 boost applications: HP Tuners describes a 2.5-bar custom operating system for compatible E38/E67 calibrations, with expanded VE tables, MAF or speed-density operation and boost-related settings. Confirm exact OS compatibility, MAP sensor and scaling, and hardware requirements; these features are not present in every stock calibration. Custom operating systems.
- Ford torque model: where supported, the Torque Inverse Calculator updates the engine torque and inverse tables used to relate scheduled torque to air load. Changes require an accurate model and validation; the calculator does not make an arbitrary torque increase safe. Torque Inverse Calculator.
- Neural-network airflow models: HP Tuners' VE Neural Network Trainer is available for select 2010-on FCA and 2019-on GM applications. When the supported calibration is open, check for Edit > VE Neural Network Trainer; the manufacturer says an absent menu item means that vehicle is not supported for this function. Create and process the relevant training file using the documented workflow, then validate the resulting calibration. High Performance Academy demonstrates the approach on a 2020 Dodge Challenger R/T 5.7 HEMI; that example does not establish support for all HEMI calibrations. HP Tuners: Neural Network Trainer; Challenger worked-example introduction.
- Ford replacement throttle body: on supported calibrations, the ETC Effective Area Calculator helps update the throttle-body model for a different throttle. Its calculation updates the effective-area and predicted-throttle-angle tables; use suitable throttle data and validate the result on the actual vehicle. ETC Effective Area Calculator.
- RAM Cummins switch-on-the-fly: HP Tuners describes a custom OS for supported CM2350 and CM2450 applications that allows selection among calibrations using the appropriate controls or Diesel Switch. Verify ECM subtype, OS and hardware before use. Diesel Switch.
Calibration and diagnostic changes should respect applicable road-use and emissions rules. Controller and transmission protection strategies are interdependent; validate changes against measured operating conditions and hardware limits.
Community evidence
Community material on the HP Tuners forum is lower-grade evidence than the manufacturer's documentation and should be treated as a lead for investigation rather than a verified fix. Three topics are covered by forum threads, each with a better-sourced counterpart elsewhere on this page.
- Histogram filtering. A filter special functions thread is the forum reference for filter set-up and is cited by an independent histogram-filtering discussion. Both support the point that driving conditions and transients determine whether histogram data is usable.
- Tune repository. A forum thread on using the tune repository exists, but the manufacturer's licensing guidance above governs: repository files are for reference and should not be flashed.
- McLaren 720S and 750S. A forum announcement accompanies the launch of this support; the manufacturer service page is the source for the application and service details above.
Not established
The forum may require access or restrict automated viewing, so the content of individual replies and attachments in these threads is unverified.
Vehicle-specific workshop examples
- GM E38: airflow and virtual VE examples — Sierra 5.3 and Camaro LS3.
- Mustang 5.0 Coyote: MAF histogram troubleshooting.
- Dodge 5.7 HEMI: neural-network airflow tuning.
More vehicle and transmission examples
- F-150 3.5 EcoBoost: boost and protection logging.
- GM 6L80: shift diagnosis and tyre calibration.
- RAM 6.7 Cummins: switch-on-the-fly modes.
- L5P Duramax: logs and intermittent stutter.
Further vehicle, engine and gearbox guides
- GM Gen V LT1 and LT4: fuelling and torque — Corvette E92 and CTS-V examples.
- 2018 Mustang 5.0 and 2.3: 10R80 shift diagnosis.
- Challenger Hellcat 6.2: boost and transmission logging.
- Nissan 350Z, 370Z and Infiniti G37: VQ tuning and logging.
Additional vehicle and gearbox case studies
- 2000 Camaro LS1 and 4L60-E shift diagnosis.
- Focus ST 2.0 and Fiesta ST 1.6 airflow and boost examples.
- Jeep Wrangler and Gladiator 3.6: GPEC controllers and 850RE hesitation.
- Golf GTI and R: DSG shift logging.
Further tuning and diagnostic cases
- Pontiac Grand Prix GTP 3.8: knock, fuel and 4T65-E logging.
- 2020 Ford Ranger 2.3 EcoBoost: boost and fuel logging.
- Jeep Wrangler TJ 4.0 and 42RLE: shift scheduling.
- Subaru WRX STI 2.5: airflow and boost logging.
- Cobalt SS 2.0 LNF: boost and fuel logging.
- F-Series 6.0 Power Stroke and 5R110: FICM and logging.
- 2006 Ram 5.9 Cummins CM849 and 48RE.
- Tacoma 4.0 1GR-FE: shift and converter-lockup logging.
- Colorado 2.8 Duramax: airflow and 6L50 logging.
- 2015 Ford 6.7 Power Stroke and 6R140 shift diagnosis.
- Ram and Jeep 3.0 EcoDiesel: torque and 8HP logging.
- Toyota Tundra and Land Cruiser 5.7: 3UR tuning and logging.
- Infiniti Q50 and Q60 VR30: boost and knock logging.
- Chevrolet Cruze and Sonic 1.4 turbo: airflow and boost diagnosis.
- Ford 6.4 Power Stroke and 5R110: boost and shift logging.
- Ram 6.7 Cummins and 68RFE: shift and converter logging.
- Nissan GT-R VR38 and GR6: logging and fault checks.
- 2005–2010 Mustang GT 4.6 3V and 5R55S: cam and shift logging.
- Cadillac ATS 2.0 LTG and 6L45: fuel and shift logging.
- Dodge Dart 2.0 Tigershark and 6F24 logging.