
Model and vehicle application
Syvecs lists this vehicle-specific standalone or plug-in ECU kit as Mitsubishi Evo 4-8 S7, with product code S7GP-EVO48. The product page and its stated vehicle, model and transmission details define this particular application; confirm market, model year, engine, ECU connector and transmission against Syvecs before ordering.
This entry describes the dedicated vehicle kit. It is distinct from the generic wire-in ECU: a plug-in kit can use application-specific adaptor wiring, a carrier, additional modules and an application calibration. The listed hardware or supported equipment can vary by revision.
Wiring and pinout
Source mismatch: The manufacturer-hosted download whose filename says S7PnP is headed “Mitsubishi Lancer Evolution 4-8(260) S6PnP” and describes an S6 carrier. It is not verified as the pinout for this S7 kit. Obtain the correct carrier and hardware-revision diagram from Syvecs before wiring.
For other variants and manual revisions consult the manufacturer's vehicle-specific manual index. Available spare inputs and outputs can be used only within their electrical limits and with a matching calibration.
Calibration and service
Use the correct Syvecs software, firmware and base calibration for the exact vehicle and installed hardware. The Syvecs software portal and firmware archive provide manufacturer support. A base map is a starting point and needs checking against the actual engine, injectors, sensors and modifications.