Tuning Wiki

GEMS EM40: A historical GEMS engine-management identity discussed in the manufacturer's forum. Manufacturer source.

Hardware and control

The forum discussion compares EM40 and EM36 for a particular aspect-file context. It does not establish universal pinout or configuration equivalence; verify actual hardware, software and installation documentation. GEMS model information.

GEMS systems use GWv4 configuration, with the required ECU definition and licence; software options and custom builds can differ. Record the label, hardware and firmware and confirm connected devices against the matching documentation. GWv4 manual.

Connector and wiring

A verified complete model-specific connector pinout was not identified in the reviewed public material. Obtain the specific drawing and build information from GEMS; do not assume the wiring of a similarly named controller.

Further references

Sources reviewed 17 November 2026.

Communications connector: integration source

Race Technology's GEMS EM40 integration guide lists the following nine-way D-type communication socket. Its connection paragraph also calls the port “E36”, so confirm the identity and options on the actual EM40 before use. The page describes CAN and RS-422 as options. This is the communication connector only; the main engine connector schedule has not been verified.

PinDocumented function
1CAN L (optional)
2TX, PC RS-232C
3RX, PC RS-232C
4BUSB, RS-422 (optional)
5Ground
6CAN H (optional)
7BUSZ, RS-422 (optional)
8BUSY, RS-422 (optional)
9BUSA, RS-422 (optional)

Directly applicable articles

Technical articles assigned to this context will appear here.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.