The HealTech AR Assistant ARA-1 is a separate configurable motorcycle rider-assistance controller. The manufacturer lists combined anti-wheelie and traction control, launch control and a pit-lane limiter. ARA-Kxx identifies model-specific harness kits; the ARA-Dxx disc/sensor kits are used for non-ABS applications. This module is not hydraulic ABS. HealTech product and kit identification; user manual.
Documented application
HealTech publishes a supplementary installation guide for Kawasaki ZX-6R 2007–2017 using ARA-1, ARA-K4A and ARA-D02. It describes an aftermarket kit arrangement rather than original-equipment fitment; the required sensor kit and harness depend on the actual bike. Match the model year, market, factory ABS and ignition before selecting the parts. HealTech Kawasaki ZX-6R supplementary manual.
The manufacturer states ARA uses transistor-controlled ignition and is incompatible with older CDI ignition. Refer to its model-specific installation and compatibility information. ARA user manual, sections 1 and 3.
Wiring reference
Kawasaki ZX-6R 2007–2017 wiring reference records only the manufacturer’s identified wiring and does not invent ECU connector cavity numbers.
Additional documented applications
HealTech also supplies guides for the Kawasaki Z1000 ABS 2007–2020 and Triumph Tiger 1050 ABS 2009, each using ARA-1 and ARA-K4A. These are model-specific aftermarket wiring examples; the colours differ between the two vehicles. Kawasaki guide; Triumph guide.
ZX-6R ABS-specific wiring
HealTech publishes a separate ZX-6R Ninja ABS 2013–2017 harness guide. Its ABS connector wires differ from the ARA-D02 non-ABS installation, so use the guide for the actual motorcycle.