Tuning Wiki

Carburettor-replacement EFI systems use an electronic throttle body on a compatible intake flange in place of a carburettor. Depending on the model, the throttle body can contain its own ECU or connect to a separate controller. A port-injection conversion with a replacement manifold is a different installation.

Choose by application

Compare the existing intake flange and throttle linkage, engine and fuel rating, number of throttle bodies, fuel system and regulator requirements, oxygen-sensor installation, ignition compatibility and controller location. A fuel-only system can use an RPM signal while leaving ignition timing to the distributor or a separate controller; an RPM connection by itself does not establish ECU timing control.

Manufacturer and model indexes

  • FiTech throttle-body EFI systems — Go EFI, Go Street, Easy Street, Mean Street, Classic and dual four-barrel models.
  • Holley Sniper EFI — 2300, Super Sniper, Jeep BBD, Rochester 2GC, Quadrajet and 4500-family applications; see individual model pages.
  • Edelbrock retrofit EFI — EZ-Street and E-Street throttle-body systems; Pro-Flo port-injection conversions use a different installation.
  • FAST original EZ-EFI and EZ-EFI 2.0 — separate system generations with different harness and ignition arrangements.

Wiring and fitment

The pages cite their exact manufacturer instructions. Identify the kit part number and revision before wiring: a manufacturer’s numbered harness connector, a wire-colour list and a numbered ECU cavity schedule are different kinds of reference.

Manufacturer overviews: FiTech throttle-body EFI; Holley Sniper installation guide; FAST EZ-EFI 2.0 base kit.

Directly applicable articles

Technical articles assigned to this context will appear here.