
FuelTech FT550LITE is a PowerFT engine-management unit. FT550-family ECU with 14 inputs and 24 outputs but no LCD touchscreen; FuelTech identifies electronic-throttle capability and an external wideband conditioner requirement. FuelTech model documentation · FuelTech range comparison.
Identification and software
Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.
Wiring and pinout
Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.
See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.
FT550 / FT550LITE connector assignments
From FuelTech PowerFT installation manual, sections 4.1 and 4.2. The source numbers the positions on the connector back, where terminals are inserted; check the original diagram, fuse and current requirements. Configurable blue and gray outputs are typical injector and ignition channels, not fixed assignments. Gray outputs need the manufacturer-specified external driver when used for injection; the FT450 has model-specific restrictions.
Connector A — 26-way
| Pin | Function |
|---|---|
| 1 | Blue output 1 |
| 2 | Blue output 2 |
| 3 | Blue output 3 |
| 4 | Blue output 4 |
| 5 | Blue output 5 |
| 6 | Blue output 6 |
| 7 | Power ground |
| 8 | Gray output 1 |
| 9 | Gray output 2 |
| 10 | Gray output 3 |
| 11 | Gray output 4 |
| 12 | Battery negative |
| 13 | 12 V from relay |
| 14 | 5 V sensor supply |
| 15 | CAN A low |
| 16 | CAN A high |
| 17 | Cam sync input |
| 18 | Magnetic RPM sensor reference |
| 19 | RPM signal input |
| 20 | Sensor input 1 |
| 21 | Sensor input 2 |
| 22 | Sensor input 3 |
| 23 | Sensor input 4 |
| 24 | Sensor input 5 |
| 25 | Sensor input 6 |
| 26 | Sensor input 7 |
Connector B — 26-way
| Pin | Function |
|---|---|
| 1 | Power ground |
| 2 | Power ground |
| 3 | CAN B low |
| 4 | CAN B high |
| 5 | Sensor input 8 |
| 6 | Sensor input 9 |
| 7 | Sensor input 10 |
| 8 | Blue output 7 |
| 9 | Blue output 8 |
| 10 | Gray output 5 |
| 11 | Gray output 6 |
| 12 | Sensor input 11 |
| 13 | Sensor input 12 |
| 14 | Blue output 9 |
| 15 | Blue output 10 |
| 16 | Gray output 7 |
| 17 | Gray output 8 |
| 18 | Sensor input 13 / strain gauge + |
| 19 | Sensor input 14 / strain gauge − |
| 20 | Blue output 11 |
| 21 | Blue output 12 |
| 22 | Yellow output 1 |
| 23 | Yellow output 2 |
| 24 | Yellow output 3 |
| 25 | Yellow output 4 |
| 26 | Sensor ground |