Tuning Wiki
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Mazda MX5 GTX is a V Series plug-in ECU documented for Mazda MX-5, Miata and GTX, subject to the manual’s application details. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide covers Mazda Miata/MX5 and GT-X; vehicle-specific configuration must be checked.

Main ECU connector: documented positions

PositionECU function
1Injection 3
45DI 2
2Aux 1
47Aux – Ign 4
3Injection 1
48Aux – Ign 3
4Aux 2
49Ignition 2 / Aux - Ign 2
5An Temp 1
52+14V Main Relay
6An Volt 4
13Ground
7An Volt 1
10Trig 2
11Trig 1
14Injection 4
15Aux 7
16Injection 2
17Aux 5
18Aux 6
19An Temp 2
20An Volt 2
33DI 1
35DI 3
37Aux 3
38Ignition 1
39Aux 4
40DI 4
42DI 5
44Aux 8

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3-
Expansion 4DI 6
Expansion 5An Volt 5
Expansion 6An Volt 6
Expansion 7-
Expansion 8An Temp 3
On Board MAPAn Volt 3

Directly applicable articles

Technical articles assigned to this context will appear here.