Tuning Wiki
MegaSquirt-II
MegaSquirt-II V3.0 kit example. Image: manufacturer product page; permission to republish confirmed by user.

MegaSquirt-II is a MegaSquirt-family engine-management product. Second-generation processor family available on V3.0 and V3.57 boards; board hardware, firmware and modifications must be recorded separately. Model source.

Identification and software

Record the ECU label, processor generation, board revision, firmware and installed hardware modifications. Calibration software and firmware must match the hardware. DIYAutoTune software and firmware · Model-specific information.

Wiring and pinout

Use the matching model document and wiring or support reference; the manufacturer manual index distinguishes wire-in and vehicle-specific variants. Check connector orientation, wiring changes, fuse ratings and output configuration before connecting loads; matching cases or software families do not establish identical pin functions.

See the MegaSquirt and MS3Pro family guide. Sources reviewed 17 November 2026.

Board variants

DIYAutoTune describes V3.0 as the through-hole kit board and V3.57 as a machine-assembled board. Both are commonly configured for two banked fuel outputs; ignition and idle outputs depend on assembly and modifications. MS2 processor identity does not establish board revision or jumper configuration. DIYAutoTune ECU options · V3.0 kit contents.

Directly applicable articles

Technical articles assigned to this context will appear here.