The MoTeC Subaru Diff Controller family adjusts the centre differential clutch using vehicle inputs and, when configured, front-to-rear wheel-speed difference. It controls torque distribution; it is not a hydraulic ABS or an engine-cut traction controller.
MoTeC describes SDC2 as a replacement DCCD controller and lists WRX/STi 2005–2007 in its support guide. Its older 2008 manual instead cites a 2004 WRX STi and similar vehicles. Because the sources differ, do not choose by year alone: verify the DCCD option, regional wiring, connector and part with MoTeC. MoTeC SDC2 support; 2008 SDC2 manual.
SDC2 normally receives wheel-speed and ABS status from an ABS CAN bus; direct sensor configurations are also documented. Connector assignments must be checked against the SDC2 documentation; do not use an SDC or SDC3 pinout by appearance.
Model-specific connector reference
SDC2 14010 connector pinout includes manufacturer-documented A and B connectors and flags contradictory CAN assignments.