
MoTeC M400M, part 13040M, is an earlier Gold Box engine controller listed in MoTeC's obsolete-product archive. M400 marine-labelled variant. Manufacturer Gold Box archive; manufacturer model glossary.
Identification and compatibility
Read the full ECU part number, connector, firmware, options and the label before identifying the correct model. Configurations and optional engine packages vary; a similar suffix, physical plug or a common calibration does not establish a universal pinout or exact cylinder capability. The manufacturer's archived product listing provides M400M-specific documentation.
Pinout and software
Consult the MoTeC M400M product and wiring downloads and M400/M600/M800/M880 manufacturer manual. Model and marine-labelled variants must be checked against their own part numbers, connector drawings and firmware. Confirm connector orientation and the complete power, ground, sensor, injector and ignition circuits with the original documentation before wiring.
These units use a legacy ECU Manager or EMP software generation appropriate to the exact controller and firmware; M1 Tune is for M1 products. See MoTeC software archive and the MoTeC manufacturer guide.
Manufacturer connector pin list
The MoTeC distributor's obsolete-product index links the M400/M600/M800/M880 user manual for the M400M. Appendix L lists the A and B positions below for M400/M600, with model-specific restrictions. Outputs marked * have no recirculation diode. Check the exact unit, connector view and hardware options against the manufacturer before wiring.
| Pin | Designation | Function and model restrictions |
|---|---|---|
| A26 | VBAT | Battery positive |
| A10,A11 | GND | Battery negative |
| A12 | 8V-ENG | 8 V engine sensor supply |
| A2 | 5V-ENG | 5 V engine sensor supply |
| B16 | 0V-ENG | Engine sensor ground |
| A13 | 8V-AUX | 8 V auxiliary sensor and CAN supply |
| A9 | 5V-AUX | 5 V auxiliary sensor supply |
| B15 | 0V-AUX | Auxiliary sensor ground |
| A18 | AUX1 | Auxiliary output 1 |
| A1 | AUX2 | Auxiliary output 2 |
| A23 | AUX3* | Auxiliary output 3 |
| A24 | AUX4* | Auxiliary output 4 |
| A31 | AUX5 | Auxiliary output 5 |
| A32 | AUX6 | Auxiliary output 6 |
| A33 | AUX7 | Auxiliary output 7 |
| A34 | AUX8 | Auxiliary output 8 |
| A3 | IGN1* | Ignition output 1 |
| A4 | IGN2* | Ignition output 2 |
| A5 | IGN3* | Ignition output 3 |
| A6 | IGN4* | Ignition output 4 |
| A7 | IGN5* | Ignition output 5; not available on M400 |
| A8 | IGN6* | Ignition output 6; not available on M400 |
| A19 | INJ1 | Injector output 1 |
| A20 | INJ2 | Injector output 2 |
| A21 | INJ3 | Injector output 3 |
| A22 | INJ4 | Injector output 4 |
| A27 | INJ5 | Injector output 5; not available on M400 |
| A28 | INJ6 | Injector output 6; not available on M400 |
| A29 | INJ7 | Injector output 7; not available on M400 or M600 |
| A30 | INJ8 | Injector output 8; not available on M400 or M600 |
| A14 | AV1 | Analogue voltage input 1 |
| A15 | AV2 | Analogue voltage input 2 |
| A16 | AV3 | Analogue voltage input 3 |
| A17 | AV4 | Analogue voltage input 4 |
| A25 | AV5 | Analogue voltage input 5 |
| B20 | AV6 | Analogue voltage input 6 |
| B21 | AV7 | Analogue voltage input 7 |
| B22 | AV8 | Analogue voltage input 8 |
| B3 | AT1 | Analogue temperature input 1 |
| B4 | AT2 | Analogue temperature input 2 |
| B5 | AT3 | Analogue temperature input 3 |
| B6 | AT4 | Analogue temperature input 4 |
| B7 | AT5 | Analogue temperature input 5 |
| B19 | AT6 | Analogue temperature input 6 |
| B8 | DIG1 | Digital input 1 |
| B9 | DIG2 | Digital input 2 |
| B10 | DIG3 | Digital input 3 |
| B11 | DIG4 | Digital input 4 |
| B1 | REF | Crank reference timing input |
| B2 | SYNC | Cam sync timing input |
| B26 | LA1-P | Lambda 1 pump current |
| B25 | LA1-S | Lambda 1 sense voltage |
| B13 | LA2-P | Lambda 2 pump current; not available on M400 |
| B12 | LA2-S | Lambda 2 sense voltage; not available on M400 |
| B17 | TX-232 | RS232 transmit data |
| B18 | RX-232 | RS232 receive data |
| B24 | CAN-LO | CAN bus low |
| B23 | CAN-HI | CAN bus high |
| B14 | 0V-COM | Communications ground |