ABS and traction systems · Bosch Motorsport ABS · Motorsport overview
The Bosch Motorsport ABS M4 is a four-wheel competition anti-lock brake kit. Bosch documents standard M4, Clubsport and Porsche Cup kits; identify the exact version and part number before obtaining parts or documentation. Bosch Motorsport ABS archive.
Kit and inputs
The M4 Clubsport data sheet describes a hydraulic unit with attached ECU, two front/rear brake circuits and two valves per wheel. It lists four active DF11 wheel-speed sensors, a front brake-pressure input and longitudinal acceleration, lateral acceleration and yaw-rate inputs. The Clubsport kit has a generic harness; Bosch says vehicle parameters may be configured in software. Bosch M4 Clubsport data sheet.
Bosch's M4 manual lists different Clubsport part numbers for DF11i versus DF11S and 500 kbaud versus 1 Mbaud. Match the sensor type, CAN configuration and harness to the exact kit. Bosch M4 kit manual, included parts.
Standard M4 kit identification and physical specification
Bosch's standard M4 kit data sheet lists Kit 1 as F 02U V00 289-01 and Kit 2 as F 02U V00 290-01. Both use customer-specific harnesses with motorsport connectors; the documented wheel-speed sensor connector differs between the two kits. Do not substitute these numbers for the Clubsport or Porsche Cup variants.
The standard kit data sheet specifies a hydraulic unit with attached 38-pin ECU, two front/rear circuits, eight valves, two pumps and two 3 cm³ accumulators. It lists approximately 1,850 g and 125 × 80.3 × 129.6 mm for the hydraulic unit with ECU, 8–16 V supply, two M12 × 1 master-cylinder ports and four M10 × 1 brake-cylinder ports. Verify the drawing and the exact kit before making hydraulic connections.
The M4 installation manual specifies four compatible active differential wheel-speed sensors and requires all four signals for operation. It describes mounting the hydraulic connections upwards and using vibration isolation. These are model-specific installation requirements; use the complete current manual for the exact kit.
Important difference from M5
ABS M4 and ABS M5 are different kits. Bosch warns that an M4 loom can damage an M5 unit and that M4 pressure sensors are not compatible. Follow the correct kit manual, hydraulic layout and competition rules. Bosch M5 manual.
Model-specific connector
ABS M4 38-position ECU connector reference lists selected positions from Bosch standard M4 drawing F.02U.S00.043-09; other configurations must be checked individually.
Documented competition application
For the 2021 Porsche Carrera Cup North America Pro-Am 991 class, IMSA regulations required the Porsche Motorsport Bosch M4 kit PMN.MTH.355.200 for the 991.2 Cup with the specified PMNA calibration. This is a race-series kit requirement, not evidence of a road-car factory fitment. The standard M4 diagram must not automatically be assumed to represent this vehicle-specific harness. IMSA 2021 Pro-Am 991 technical regulations, page 18.
Porsche Cup variant
The ABS M4 Kit Porsche Cup has separately documented 997 Cup and 991 Cup motorsport applications and Porsche-specific harnesses.
Further documented race-car applications
M4 documented vehicle applications identifies the Huracán Super Trofeo Evo, Panoz Avezzano GT and HAWKS Racing H09 from manufacturer and event sources.