Overview and hardware
Syvecs S6 PnP is a British engine-management ECU. Legacy vehicle-specific S6 plug-in family, listed separately in the manufacturer's firmware archive. The S6 was initially applied to Subaru Impreza models. Carrier-board connections and I/O configuration vary by vehicle, year and wiring loom; the manufacturer supplies Subaru and Mitsubishi-specific pinouts and an external connector schedule. Individual kit compatibility needs checking.
Compare the required injector, ignition, actuator and sensor channels with the hardware available on the actual ECU. Capabilities and configurable functions depend on firmware, hardware revision and calibration.
Wiring and pinout
Manufacturer S6 PnP wiring guide and pinout. Use the guide's connector view and pin numbering and verify ECU hardware revision and configuration before wiring. Pin and input functions may vary by calibration or vehicle. Syvecs wiring index contains further example pinout files.
Vehicle-specific replacement kits use their own harness or carrier board. Consult the corresponding vehicle-specific Syvecs guide rather than assuming a generic schedule applies.
Calibration and sources
Syvecs uses SCal calibration software and provides firmware and base calibrations. Check version compatibility with the unit and preserve the existing tune before changes.