
AEM Infinity 358 (manufacturer part 30-7114) is a programmable Infinity engine-management ECU, a separately identified model in AEM's hardware comparison.
Identification and capability
| Manufacturer specification | Infinity 358 |
|---|---|
| Maximum cylinders, as listed | 8 |
| Sequential injector outputs | 8 high-impedance |
| Ignition | 8 direct coil-on-plug drivers and one distributor driver |
| Connector positions | 73 |
| Electronic throttle | No |
| CAN channels | 1 |
| Internal wideband channels | 0 |
Compare injector impedance and ignition driver type before connecting components. Maximum cylinder count does not imply every feature or configuration is available simultaneously; verify exact part number, harness and calibration. AEM lists InfinityTuner software separately from Series 1/2 EMS software.
Processor
Retailer listings reproducing AEM's product description state that the Infinity range is built around a 32-bit floating-point automotive processor running at 200 MHz and rated at 400 MIPS (vendor claim). Neither those listings nor AEM's hardware specification name the manufacturer or part number of the processor, so the exact microcontroller is not established.
Engine applications
The 358 is a universal ECU rather than a vehicle-specific unit. AEM lists it for engines of up to eight cylinders, with sequential high-impedance injection and eight direct coil-on-plug drivers, so it suits engines fitted with coil-on-plug ignition. Engine codes are defined by the installer's configuration and no factory engine list exists.
Connector and wiring
AEM's Infinity 358 family hardware and wiring reference gives electrical limits and connector diagrams. Match the ECU's number and physical harness, and verify connector orientation. The 506 and 508 share an 80-way shell but some pin assignments differ; Series 3 and Series 7 use different connectors and are not interchangeable by name.
Connector pinout
The full 73-position C1 pin table with a redrawn pin-index diagram is on AEM Infinity 358 connector pinout (manufacturer documentation; diagram redrawn by Tuning Wiki).
Further documents
- Manufacturer wiring and hardware specifications
- AEM Infinity user manual and comparison
- AEM engine management support and application harnesses
- AEM manufacturer index
Sources reviewed 17 November 2026. Availability of an exact part or application should be checked separately.
Sources
- AEM Infinity 358 product listing, Racedom (retailer; seen in search results). Accessed 19 November 2026.
- AEM Infinity Series-3 hardware specification 10-7113/7114, AEM, 26 September 2016. Accessed 19 November 2026.