Adaptronic standalone ECU manufacturer history, model identities, and wiring documentation.
Published
Adaptronic produced aftermarket engine-control hardware and later became part of Haltech. Haltech announced the end of Adaptronic business operations on 15 May 2022. Haltech historical notice.
Models include the M1200, M2000 and M6000 modular wire-in ECUs, e420d, e440d and e1280s, and application-specific eMod and eSelect products. Hardware and vehicle-specific pinouts differ. Haltech's Adaptronic software, model and pinout archive.
Detailed model references appear below. Marketing product photographs are linked from the manufacturer sources, where available. Check exact part number, hardware and loom before using a pinout.
Individual model references
Each page identifies available model-specific evidence and wiring sources. Coverage is not necessarily exhaustive; exact specifications, applications and pinouts remain unverified for some historic units.
The individual Select part numbers below are identified in the manufacturer’s legacy archive. Select and eMod ECUs for the same car have different pin assignments. Match the exact guide and application; some archive filenames do not match the document inside.
Pin assignments of the Adaptronic e1280s high-current (101-116) and main (1-60) connectors, redrawn as pin-index diagrams from Adaptronic's pinout guide (looking into the ECU from the loom side).
Pin assignments of the Adaptronic e420d 22-way (1A-1V) and 26-way (2A-2Z) connectors, redrawn as pin-index diagrams from Adaptronic's model-specific pinout guide (loom-side view).
Pin assignments of the Adaptronic e440d Select 22-way (1A-1V) and 26-way (2A-2Z) connectors, redrawn as pin-index diagrams from Adaptronic's pinout manual (loom-side view).
Connector pinout of the Adaptronic eMod003 plug-in ECU for the Nissan S14 200SX/Silvia SR20DET and S13 CA18DET: 76 positions (1-60 and 101-116) with Adaptronic functions, redrawn from the manufacturer sheet.
Connector pinout of the Adaptronic eMod004 plug-in ECU for the Nissan R32 Skyline GTST (RB20DET) and R33 Skyline GTST (RB25DET): 76 positions (1-60 and 101-116) with Adaptronic and factory functions, redrawn from the manufacturer sheet.
Connector pinout of the Adaptronic eMod005 plug-in ECU for the Nissan S15 200SX/Silvia SR20DET: 64 positions (1-48 and 101-116) with Adaptronic and factory functions, redrawn from the manufacturer sheet.
Connector pinout of the Adaptronic eMod009 plug-in ECU for the Mazda RX-7 FC Series 4: four connectors, 68 positions, redrawn from Adaptronic's manufacturer pinout archive.
Connector pinout of the Adaptronic eMod010 plug-in ECU for the Mazda RX-7 FC Series 5: four connectors, 76 positions, redrawn from Adaptronic's manufacturer pinout archive.
Connector pinout of the Adaptronic eMod011 plug-in ECU for the Mazda RX-7 FD Series 6: four connectors, 76 positions, redrawn from Adaptronic's manufacturer pinout archive.
Connector pinout of the Adaptronic eMod012 plug-in ECU for the Mazda RX-7 FD Series 8: four connectors, 100 positions, redrawn from Adaptronic's manufacturer pinout archive.
Pin-by-pin functions for the 22-way and 26-way connectors of the Adaptronic M1200 modular ECU, from the manufacturer wiring diagrams, with pin-index diagrams.
Pin assignments of the Adaptronic M2000 26-way and 34-way connectors, redrawn as pin-index diagrams from Adaptronic's wiring diagrams retained in Haltech's archive.
Pin assignments of the Adaptronic M6000 J1, J2, J3 and J4 connectors, redrawn as pin-index diagrams from Adaptronic's wiring diagrams retained in Haltech's archive.