A turbocharger uses exhaust gas to drive a turbine. The turbine and compressor share a shaft, so the turbine drives the compressor and raises the pressure of the intake air. A charge cooler can reduce the temperature of that compressed air before it reaches the engine. Garrett turbocharger system overview
How boost is controlled
A wastegate controls how much exhaust bypasses the turbine. A variable-geometry turbo changes the flow through the turbine using adjustable vanes. Identify the turbo and its actuator from the vehicle documentation before applying a test procedure. Turbocharger actuators and boost control
Start with the whole system
For poor boost, noise or smoke, check the air path, charge hoses, intercooler, exhaust restrictions and oil supply or drain as applicable. Compare requested and measured boost where available. A turbo damaged by an upstream problem can fail again if only the turbo is replaced. Garrett diagnostic guidance
Turbocharging naturally aspirated Honda D, B, K20/K24, H22 and F20C engines: stock-internal limits, the K20 head on K24 block hybrid, LS/VTEC, ECUs and MAP sensors, manifold types and failures, kits, common turbos and reported dyno results.
Why a hot turbo needs oil flow after hard driving, what oil coking is, how a turbo timer works, why modern turbos need it less, and the simpler habit of driving gently before shutdown.
The difference between turbo lag and boost threshold, what slows a turbo to spool, and the main ways of improving response (smaller turbine, twin-scroll, variable geometry, electric assist, anti-lag) with their trade-offs.
Super 5 GT Turbo (Cléon-Fonte, Garrett T2, carburettor): Phase 1 and 2 differences, weak points, turbo and intercooler upgrade routes, standalone injection, and what is unverified.
Mid-engined Renault 5 Turbo and Turbo 2: Cléon-Fonte with Garrett T3 and Bosch K-Jetronic, the differences between the two cars, conflicting power figures, and what tuning evidence is missing.
Renault 18 Turbo and Fuego Turbo (Garrett T3, carburettor): factory boost and power figures from period road tests and Renault's archive, conflicting displacement and fuelling data, and the thin upgrade evidence.
Renault 21 2.0 Turbo: factory Garrett T3 and Bendix management figures from a 1987 road test, known driving character, and the thin and unverified evidence on boost limits and upgrades.
How to read a turbo compressor map (corrected flow, pressure ratio, surge, choke, efficiency), how to estimate engine airflow, and how to check that a turbo suits an engine, with a worked example.
Manufacturer turbo kits and around-200-to-over-300-hp conversion example for selected 2.0 TSI/TFSI EA888 Gen 1 and 2 engines, including fitment, fuel and ECU requirements.