Tuning Wiki

Haltech Nexus S2 is a programmable engine-management ECU in Haltech's Nexus family. Designed for up to 4 cylinders or 2 rotors with full sequential fuel and ignition; 8 cylinders may use semi-sequential injection. One onboard wideband controller, two knock inputs, 11 analogue inputs, six synchronised inputs and up to two DBW throttles. Haltech universal comparison.

Haltech Nexus S2 and S3 promotional image
Haltech S-series range; image: Haltech, reproduced with user-confirmed permission.

Identification and I/O

ItemManufacturer comparison
Injector channels4, peak-and-hold
Ignition channels4
Digital pulsed outputs6
MAP sensor4 bar internal
Tuning softwareNexus Software Programmer (NSP); verify installed firmware

Haltech identifies the S-series as successors to the Elite 1500/2500, but says the ECU-side connectors differ and the harness must be repinned. The S-series has no onboard power-distribution module; check current and output ratings in the appropriate guide. S-series specification and upgrade notes.

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Nexus S2 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.