Tuning Wiki

The MicroTech LT-9c Fuel Only (manufacturer SKU LT9CFO) is a fuel controller, not the similarly named fuel-and-ignition version. A fuel-only unit that can control additional injectors alongside a factory ECU or operate as a standalone fuel controller. MicroTech identifies four high-impedance drivers and states a minimum 6 ohms per injector; selectable MAP calibration options are listed at 20, 30 and 45 psi. MicroTech manufacturer product description.

Identification and wiring

Record the complete model, hardware, sensor configuration and engine-specific setup before selecting a wiring diagram. MicroTech says the unit is supplied with a labelled flying-lead loom and wiring diagram; an independently verified complete pinout for this fuel-only variant has not yet been located. Obtain its matching diagram from MicroTech before wiring. Do not assume the fuel-and-ignition model's assignments or ignition outputs apply.

See the LT-9c fuel-and-ignition reference and MicroTech model index.

Directly applicable articles

Technical articles assigned to this context will appear here.