Tuning Wiki

Pro-Flo 4+ is a separate weather-resistant ECU and engine-specific harness system for selected GM Gen III/IV LS, Ford Coyote and Dodge Gen III HEMI engine swaps. The manufacturer lists drive-by-wire and variable-cam capability depending on the application. These kits control EFI engines and existing compatible intake components; they are not a drop-on carburettor-replacement throttle body. Select the crank trigger, engine generation, pedal, throttle and accessory harnesses for the exact application. See Edelbrock’s system description.

Edelbrock Pro-Flo 4 Plus EFI manual cover
Manufacturer installation-manual cover for kit 36130; an application illustration, not every kit. Edelbrock manual; reproduced with permission.

Controller, wiring and selection

The separate ECU works with an application-specific engine harness and sensors; the mobile E-Tuner software communicates with the ECU rather than replacing it. Follow the exact kit’s manual for connector orientation, fuel pressure, relays, injector and ignition hardware. A complete numbered ECU connector pinout has not yet been verified for this page.

Individual systems and applications

Directly applicable articles

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.