Three diesel names
Siemens, and then Continental, supplied diesel controllers under more than one name. The three that this wiki separates are SID, PPD and PCR 2.1. They are not three words for one control unit, and they are not the petrol MS, MSS or Simos pages.
The company name changed in 2007. Continental announced the purchase of Siemens VDO on 25 July 2007, the European Commission cleared it on 29 November 2007, and Continental completed it on 3 December 2007. A diesel controller of that period can be marked Siemens VDO or Continental. The type on the label is the identification. Bosch EDC16 and EDC17 ran many of the other diesels in the same years, including Volkswagen Group common-rail engines and some pump-nozzle engines. The fuel system those Bosch controllers sit on is described on common-rail diesel fuel systems.
How the three differ
- SID is the common-rail diesel series. The number is the generation. SID 803 is recorded across Citroën, Ford, Peugeot and Volvo. SID206 is recorded on Ford TDCi. Published lists after that point disagree, so the label wins.
- PPD, in Volkswagen's own programme, is a piezo pump-injector unit developed with Siemens VDO for the 2.0-litre 125 kW four-valve TDI. File catalogues also use PPD 1.x as a controller name. Those are two different uses of the letters.
- PCR 2.1 is a Continental diesel controller. The Golf VI 1.6 TDI CAYC examples carry Continental numbers and, on the parts label, the words Simos PCR 2.1. That Simos wording does not make the unit a petrol Simos 18.
The EA189 software contract
Continental's 2026 shareholder report says Volkswagen awarded the EA189 engine-control software to Siemens VDO in May 2006, and that the work came across when Continental bought Siemens VDO. The same report says the software on the Golf and Golf Plus EA189 changed from its starting mode once conditions specific to the regulatory test were no longer present. The passage used here does not give that controller the name PCR 2.1. An EA189 engine is identified from its own label. This page does not describe how that software selected its mode.
Sources
- Continental, ad-hoc announcement, 25 July 2007. Purchase of Siemens VDO for €11.4 billion. Announcement.
- European Commission, 29 November 2007, IP/07/1816. Clearance of the Siemens VDO acquisition, including the ECU markets examined. IP/07/1816.
- EE Times, after the takeover. Continental completed the Siemens VDO acquisition on 3 December 2007. EE Times. Accessed 2026-11-13.
- Continental, joint report of the Supervisory Board and the Executive Board, 2026 annual shareholders' meeting, agenda item 9. EA189 engine-control software awarded to Siemens VDO in May 2006, and the mode change described for the Golf and Golf Plus. Joint report. Accessed 2026-11-13.