Tuning Wiki

The Tornado GDI is a discontinued direct-injection model in the SC hardware family. SCS lists the Delta GDI6 as the corresponding replacement and explicitly says the change requires significant wiring modification. Manufacturer or supplier evidence.

Identification, software and support

Record the complete ECU label, hardware revision, original application, connector type and current calibration. SCS identifies the older Typhoon, Tornado, Storm and Hurricane families with its final SXT Legacy software. Its newer Delta devices use the current SXTune release. The availability of calibration migration does not mean the same project should be written to different hardware without conversion. SCS software downloads · manufacturer upgrade notes.

Model-specific wiring

A complete verified pinout for this precise legacy variant was not established here. Obtain the original ECU and harness diagram from SCS before wiring; the Delta GDI6 drawing is not evidence of every original pin's electrical function.

Replacement and calibration

SCS identifies Delta GDI6 as the replacement for this model in its trade-in list. Consult SCS about ECU-specific connector changes, harness, software and calibration before making any conversion. See the SCS model index for the separate Delta reference.

Directly applicable articles

Technical articles assigned to this context will appear here.