Tuning Wiki

Adaptronic M2000 is a standalone or earlier programmable engine-management system. Modular M2000 universal wire-in ECU. Haltech's archive identifies the M2000 Rev2 pinout, startup guide and M2000/M6000 basemap; modules and software change the available configuration. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

Consult the Adaptronic M2000 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.

Further information

Connector pinout

A structured pinout with redrawn pin-index diagrams of the 26-way and 34-way connectors (60 positions, manufacturer documentation) is on Adaptronic M2000 connector pinout. Diagram redrawn by Tuning Wiki from the Adaptronic M2000 wiring diagrams.

Manufacturer connector pinouts

Transcribed from the Adaptronic M2000 wiring diagrams in Haltech's archive. The 26-way sheet is titled J1, while the connector drawing on that sheet says J2. To avoid resolving the inconsistency by assumption, the tables identify the connectors by position count; confirm the labels on the unit. Spare positions may depend on configuration. The diagrams require external ignition drivers or coils with built-in igniters; see the source for wiring orientation, wire colours, current limits, power supplies and ECU configuration.

26-way connector

PinFunction in drawing
1Injector 1
2Injector 2
3Injector 3
4Injector 4
5Injector 5
6Spare
7Spare
8Injector 6
9Ignition 1
10Ignition 2
11Ignition 3
12Ignition 4
13Spare
14Injector 7
15Ignition 5
16Ignition 6
17Ignition 7
18Ignition 8
19Spare
20Injector 8
21Auxiliary 1
22Auxiliary 2
23Auxiliary 3
24Auxiliary 4
25Spare
26Spare

34-way connector

PinFunction in drawing
1CAS 1
2CAS 2
3Internal MAP / IMAP
4Fuel pressure
5Engine coolant temperature
6Servo
712 V ECU supply
8Power ground
9Power ground
10Sensor ground
11CAS 3
12Exhaust manifold pressure / EMAP
13Oil pressure
14Manifold air temperature
15CAN high
16EFI / fuel pump relay
17Ignition switch (source says need not be wired)
18Oxygen 1
19Oxygen 2
20TPS 1
21Fuel temperature
22External 0–5 V input 1
23CAN low
24Vehicle speed sensor
25Tachometer
26Knock
275 V sensor supply
28TPS 2
29Oil temperature
30External 0–5 V input 2
31Digital input 1
32Digital input 2
33Digital input 3
34Digital input 4

Directly applicable articles