Tuning Wiki
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Toyota ST205 is a V Series plug-in ECU documented for Toyota MR2 and Celica ST205 applications as listed by Link. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 20, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide lists this schedule for Celica ST205 and MR2 Rev2–3. On V1.0 boards An Volt 4 is shared by pin 34 and expansion position 4: connect only one sensor to that shared channel.

Main ECU connector: documented positions

PositionECU function
2Injection 1
51DI1
3Injection 2
52DI2
4Aux 2
53DI3
5Aux 1
57Aux5
6Aux - Inj6
63Aux6
7Aux - Ign2
70Aux7
8Aux - Ign3
71+14V
10Trig1
46Ground
12Aux3
34AnVolt4*
13Aux8
15Injection 3
16Injection 4
17Aux - Ign4
18Aux - Ign5
20Ignition 1
22Trig2
33AnVolt1
35AnTemp1
36AnTemp2
37Anvolt3
38+5V
39Aux4
44AnVolt2
45AnTemp3

Other connections

PositionECU function
Expansion 1DI4
Expansion 2DI5
Expansion 3DI6
Expansion 4AnVolt4*
Expansion 5AnVolt5
Expansion 6AnVolt6

Directly applicable articles

Technical articles assigned to this context will appear here.