Tuning Wiki
FuelTech FT700 ECU
FuelTech FT700. Image: manufacturer product page; permission to republish confirmed by the user.

FuelTech FT700 is a VisionFT engine-management unit. VisionFT controller with a nominal 7-inch touchscreen, 36 inputs and 50 outputs per FuelTech’s comparison. Its fuel model includes VE or injection-time tuning, with integrated O2 conditioners and Wi-Fi. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FuelTech Vision. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT700-family connector pin assignments

The FuelTech FT700 / FT700Plus quick installation guide describes the 34-way A and B connectors and optional C, D and M harness connections below. Identify the connector from its markings and the guide's rear views. Inputs and outputs can be configured: check the actual calibration, hardware, current limits, relay and ground wiring before connecting loads. In particular, trigger references are not generic grounds for Hall sensors.

A — 34 way

PinFunction and harness wire
1Blue output #1 (blue #1)
2Blue output #2 (blue #2)
3Blue output #3 (blue #3)
4Blue output #4 (blue #4)
5Blue output #5 (blue #5)
6Blue output #6 (blue #6)
7Blue output #7 (blue #7)
8Blue output #8 (blue #8)
9Blue output #9 (blue #9)
10Blue output #10 (blue #10)
11Blue output #11 (blue #11)
12Blue output #12 (blue #12)
13Blue output #13 (blue #13)
14Blue output #14 (blue #14)
15Blue output #15 (blue #15)
16Blue output #16 (blue #16)
17Power ground (black/white)
18Gray output #1 (gray #1)
19Gray output #2 (gray #2)
20Gray output #3 (gray #3)
21Gray output #4 (gray #4)
22Gray output #5 (gray #5)
23Gray output #6 (gray #6)
24Gray output #7 (gray #7)
25Gray output #8 (gray #8)
26Yellow output #1 (yellow #1)
27Yellow output #2 (yellow #2)
28Yellow output #3 (yellow #3)
29Yellow output #4 (yellow #4)
30Yellow output #5 (yellow #5)
31Yellow output #6 (yellow #6)
32Yellow output #7 (yellow #7)
33Yellow output #8 (yellow #8)
3412 V input from main relay (red)

B — 34 way

PinFunction and harness wire
1RPM signal input (red)
2Magnetic RPM sensor reference (white)
3Cam sync signal input (red)
4Cam sync reference input (white)
5White input #1
6White input #2
7White input #3
8White input #4
9White input #5
10Battery negative (black)
11CAN A low (yellow/blue)
12CAN A high (white/red)
13White input #6
14White input #7
15White input #8
16White input #9
17White input #10
18Power ground (black/white)
19Power ground (black/white)
20CAN B high (white/red)
21White input #11
22White input #12
23White input #13
24White input #14
25White input #15
2612 V input from main relay (red)
275 V sensor supply (green/red)
28CAN B low (yellow/blue)
29Sensor ground (green/black)
30White input #16
31White input #17
32White input #18
33White input #19 / Power Shift positive
34White input #20 / Power Shift negative

C — 26 way, optional

PinFunction
112 V input from main relay
212 V input from main relay
312 V input from main relay
4Gray output #9
5Gray output #10
6Gray output #11
7Gray output #12
8Yellow output #9
9Yellow output #10
10Yellow output #11
11Yellow output #12
12Yellow output #13
13Yellow output #14
14Yellow output #15
15Yellow output #16
16Yellow output #17
17Yellow output #18
18CAN C high
19CAN C low
20Yellow output #19
21Yellow output #20
22O2 sensor #1 heater positive
23O2 sensor #2 heater positive
24Power ground
25Power ground
26Power ground

C22 and C23 can provide sensor-heater positives; the guide also describes alternate yellow-output use when the built-in oxygen conditioners are not used.

D — 26 way, optional

PinFunction
1Frequency channel #1, red; configurable input #21
2Frequency channel #1, white; configurable input #22
3Frequency channel #2, red; configurable input #23
4Frequency channel #2, white; configurable input #24
5Frequency channel #3, red; configurable input #25
6Frequency channel #3, white; configurable input #26
7Frequency channel #4, red; configurable input #27
8Frequency channel #4, white; configurable input #28
9High-speed input #1; configurable input #29
10High-speed input #2; configurable input #30
11High-speed input #3; configurable input #31
12High-speed input #4; configurable input #32
13High-speed input #5; configurable input #33
14High-speed input #6; configurable input #34
15High-speed input #7; configurable input #35
16High-speed input #8; configurable input #36
17O2 sensor #1 signal
18O2 sensor #1 ground
19O2 sensor #1 IP
20O2 sensor #1 calibration resistor
21O2 sensor #1 heater negative
22O2 sensor #2 signal
23O2 sensor #2 ground
24O2 sensor #2 IP
25O2 sensor #2 calibration resistor
26O2 sensor #2 heater negative

For O2 sensors, heater positive for #1 is C22 and for #2 is C23. Frequency and high-speed inputs may also be configured as analogue inputs. Follow the source for exact sensor types and output configuration.

M — 14 way, optional

PinFunction
1Ethernet +
2CAN D high
3Right microphone input
4Right speaker signal
5Microphone ground
6Video #2 ground
7Video #2 signal
8Ethernet −
9CAN D low
10Left microphone input
11Left speaker signal
12Speaker ground
13Video #1 ground
14Video #1 signal

The source's M13 function label says video #1 ground while its information column says video #2; confirm the harness and manufacturer's diagram before connecting.

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.