Tuning Wiki

Link G1 LEM V4 is a documented G1 Link engine-management designation. Link lists LEM V4 as supported by legacy PCLink V2.5 for G1 ECUs. G1 is an earlier platform than G2/G3 and G4; retain the V4 revision in identification. Identification source.

Identification and software

Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.

Model-specific wiring

The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.

See Link standalone ECUs for related models and generation distinctions.

V4 loom identification evidence

In a Link staff discussion of LEM V4, AUX1 / RPM switch is identified as brown/white for the discussed boost-control installation. This is a loom-colour identification, not a verified connector cavity; identify the exact unit, configuration and wiring before applying it. The staff specifically distinguished the LEM manual from the LinkPlus manual.

Directly applicable articles

Technical articles assigned to this context will appear here.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.