Tuning Wiki

MicroTech LT-10c is a standalone or earlier programmable engine-management system. LT-10c has four injector and four ignition outputs. MicroTech lists sequential injection on supported four-cylinder and two-rotor engines or wasted-spark ignition up to eight cylinders. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

The MicroTech LSU 4.9 wideband guide identifies the LT-10c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.

Further information

Wideband controller connections

MicroTech's LSU 4.9 wideband kit guide identifies these 10C ECU connections. The guide says to splice the LSU controller's brown ground lead into the matching brown sensor-ground wire on the ECU's 24-way main harness. This table covers the wideband signal and ground only, not the full ECU connector.

ECU wireFunction
Black/redOxygen sensor input
BrownOxygen sensor ground

Directly applicable articles

Technical articles assigned to this context will appear here.