
MoTeC M190 is an M1-family programmable ECU, part 13190. The manufacturer identifies it for up to 12 cylinders and port injection. M1 hardware is paired with a software package; features, channels and licences depend on the loaded package and hardware revision. MoTeC M190 product information and product image.
Identification and inputs/outputs
| Field | Manufacturer comparison |
|---|---|
| Injection hardware | 12 port injector outputs; 12 low-side injector outputs |
| Ignition | 12 low-side ignition outputs |
| Half-bridge outputs | 10 |
| Universal digital inputs | 12 |
| Analogue voltage / temperature inputs | 17 / 6 |
| CAN buses | 3 |
| Connector configuration | three Autosport, 136 positions |
Numbers describe hardware capacity; they do not establish simultaneous availability for a specific application. MoTeC’s M1 comparison distinguishes port, inductive direct and piezo direct drivers. Check the exact injector and package; an external driver is not interchangeable with an internal driver.
Wiring and pinout
Use the M190 connector pinout and datasheet on the manufacturer product page. Connector type, keying and positions vary across M1 models; do not copy pin functions from another ECU. Verify the hardware revision, package, output allocations, wiring orientation, electrical limits and power and earth provisions against the exact unit.
Manufacturer connector tables
These tables reproduce the complete connector position and designation lists from the MoTeC M190 datasheet. Pin identifiers are kept as printed, including letter case. Check the original connector views, mating key, wire size, electrical ratings and hardware revision before connecting. Output functions depend on the ECU package and configuration; direct-injection models require their specified drivers and precautions.
Connector A — 55 positions
| Pin | Designation | Function |
|---|---|---|
| A01 | INJ_LS3 | Low Side Injector 3 |
| A02 | INJ_LS2 | Low Side Injector 2 |
| A03 | INJ_LS1 | Low Side Injector 1 |
| A04 | INJ_LS12 | Low Side Injector 12 |
| A05 | INJ_LS4 | Low Side Injector 4 |
| A06 | LA_NB2 | Lambda Narrow Input 2 |
| A07 | LA_NB1 | Lambda Narrow Input 1 |
| A08 | SEN_5V0_C1 | Sensor 5.0V C |
| A09 | SEN_5V0_C2 | Sensor 5.0V C |
| A10 | INJ_LS8 | Low Side Injector 8 |
| A11 | INJ_PH1 | Peak Hold Injector 1 |
| A12 | INJ_PH2 | Peak Hold Injector 2 |
| A13 | AV11 | Analogue Voltage Input 11 |
| A14 | DIG2 | Digital Input 2 |
| A15 | RS232_RX | RS232 Receive |
| A16 | SEN_5V0_C3 | Sensor 5.0V C |
| A17 | INJ_LS11 | Low Side Injector 11 |
| A18 | SEN_0V_C1 | Sensor 0V C |
| A19 | SEN_0V_C2 | Sensor 0V C |
| A20 | SEN_0V_C3 | Sensor 0V C |
| A21 | DIG1 | Digital Input 1 |
| A22 | LIN | LIN Bus |
| A23 | RS232_TX | RS232 Transmit |
| A24 | CAN2_HI | CAN Bus 2 High |
| A25 | INJ_LS7 | Low Side Injector 7 |
| A26 | INJ_PH3 | Peak Hold Injector 3 |
| A27 | AV15 | Analogue Voltage Input 15 |
| A28 | AV16 | Analogue Voltage Input 16 |
| A29 | AV17 | Analogue Voltage Input 17 |
| A30 | DIG3 | Digital Input 3 |
| A31 | CAN2_LO | CAN Bus 2 Low |
| A32 | INJ_LS10 | Low Side Injector 10 |
| A33 | INJ_PH4 | Peak Hold Injector 4 |
| A34 | AV13 | Analogue Voltage Input 13 |
| A35 | AV12 | Analogue Voltage Input 12 |
| A36 | INJ_PH7 | Peak Hold Injector 7 |
| A37 | DIG4 | Digital Input 4 |
| A38 | BAT_BAK | Battery Backup |
| A39 | CAN3_HI | CAN Bus 3 High |
| A40 | INJ_LS6 | Low Side Injector 6 |
| A41 | AV14 | Analogue Voltage Input 14 |
| A42 | INJ_PH9 | Peak Hold Injector 9 |
| A43 | INJ_PH10 | Peak Hold Injector 10 |
| A44 | INJ_PH6 | Peak Hold Injector 6 |
| A45 | INJ_PH5 | Peak Hold Injector 5 |
| A46 | CAN3_LO | CAN Bus 3 Low |
| A47 | INJ_LS9 | Low Side Injector 9 |
| A48 | INJ_LS5 | Low Side Injector 5 |
| A49 | INJ_PH11 | Peak Hold Injector 11 |
| A50 | INJ_PH12 | Peak Hold Injector 12 |
| A51 | INJ_PH8 | Peak Hold Injector 8 |
| A52 | IGN_LS12 | Low Side Ignition 12 |
| A53 | IGN_LS9 | Low Side Ignition 9 |
| A54 | IGN_LS10 | Low Side Ignition 10 |
| A55 | IGN_LS11 | Low Side Ignition 11 |
Connector B — 26 positions
| Pin | Designation | Function |
|---|---|---|
| B_A | OUT_HB1 | Half Bridge Output 1 |
| B_B | OUT_HB2 | Half Bridge Output 2 |
| B_C | OUT_HB3 | Half Bridge Output 3 |
| B_D | OUT_HB4 | Half Bridge Output 4 |
| B_E | OUT_HB5 | Half Bridge Output 5 |
| B_F | OUT_HB6 | Half Bridge Output 6 |
| B_G | BAT_NEG1 | Battery Negative |
| B_H | BAT_POS1 | Battery Positive |
| B_J | BAT_POS2 | Battery Positive |
| B_K | BAT_POS3 | Battery Positive |
| B_L | BAT_POS4 | Battery Positive |
| B_M | OUT_HB10 | Half Bridge Output 10 |
| B_N | OUT_HB9 | Half Bridge Output 9 |
| B_P | OUT_HB8 | Half Bridge Output 8 |
| B_R | OUT_HB7 | Half Bridge Output 7 |
| B_S | OUT_LS4 | Low Side Output 4 |
| B_T | OUT_LS6 | Low Side Output 6 |
| B_U | OUT_LS1 | Low Side Output 1 |
| B_V | OUT_LS2 | Low Side Output 2 |
| B_W | BAT_NEG2 | Battery Negative |
| B_X | BAT_NEG3 | Battery Negative |
| B_Y | BAT_NEG4 | Battery Negative |
| B_Z | BAT_NEG5 | Battery Negative |
| B_a | OUT_LS5 | Low Side Output 5 |
| B_b | OUT_LS3 | Low Side Output 3 |
| B_c | BAT_NEG6 | Battery Negative |
Connector C — 55 positions
| Pin | Designation | Function |
|---|---|---|
| C01 | IGN_LS4 | Low Side Ignition 4 |
| C02 | IGN_LS3 | Low Side Ignition 3 |
| C03 | IGN_LS8 | Low Side Ignition 8 |
| C04 | IGN_LS6 | Low Side Ignition 6 |
| C05 | IGN_LS5 | Low Side Ignition 5 |
| C06 | AV8 | Analogue Voltage Input 8 |
| C07 | AV10 | Analogue Voltage Input 10 |
| C08 | IGN_LS2 | Low Side Ignition 2 |
| C09 | IGN_LS7 | Low Side Ignition 7 |
| C10 | UDIG8 | Universal Digital Input 8 |
| C11 | AV6 | Analogue Voltage Input 6 |
| C12 | AV7 | Analogue Voltage Input 7 |
| C13 | AV9 | Analogue Voltage Input 9 |
| C14 | SEN_0V_A1 | Sensor 0V A |
| C15 | SEN_0V_A2 | Sensor 0V A |
| C16 | IGN_LS1 | Low Side Ignition 1 |
| C17 | UDIG7 | Universal Digital Input 7 |
| C18 | UDIG1 | Universal Digital Input 1 |
| C19 | UDIG12 | Universal Digital Input 12 |
| C20 | UDIG11 | Universal Digital Input 11 |
| C21 | UDIG10 | Universal Digital Input 10 |
| C22 | UDIG9 | Universal Digital Input 9 |
| C23 | SEN_0V_B1 | Sensor 0V B |
| C24 | CAN1_HI | CAN Bus 1 High |
| C25 | UDIG3 | Universal Digital Input 3 |
| C26 | ETH_RX- | Ethernet Receive- |
| C27 | UDIG4 | Universal Digital Input 4 |
| C28 | AV4 | Analogue Voltage Input 4 |
| C29 | AV5 | Analogue Voltage Input 5 |
| C30 | SEN_0V_B2 | Sensor 0V B |
| C31 | CAN1_LO | CAN Bus 1 Low |
| C32 | UDIG2 | Universal Digital Input 2 |
| C33 | ETH_RX+ | Ethernet Receive+ |
| C34 | ETH_TX- | Ethernet Transmit- |
| C35 | AV3 | Analogue Voltage Input 3 |
| C36 | AV2 | Analogue Voltage Input 2 |
| C37 | AT1 | Analogue Temperature Input 1 |
| C38 | AT3 | Analogue Temperature Input 3 |
| C39 | AT2 | Analogue Temperature Input 2 |
| C40 | UDIG5 | Universal Digital Input 5 |
| C41 | ETH_TX+ | Ethernet Transmit+ |
| C42 | AV1 | Analogue Voltage Input 1 |
| C43 | KNOCK3 | Knock Input 3 |
| C44 | KNOCK2 | Knock Input 2 |
| C45 | AT5 | Analogue Temperature Input 5 |
| C46 | AT4 | Analogue Temperature Input 4 |
| C47 | UDIG6 | Universal Digital Input 6 |
| C48 | SEN_5V0_A1 | Sensor 5.0V A |
| C49 | KNOCK4 | Knock Input 4 |
| C50 | SEN_5V0_B1 | Sensor 5.0V B |
| C51 | KNOCK1 | Knock Input 1 |
| C52 | AT6 | Analogue Temperature Input 6 |
| C53 | SEN_5V0_A2 | Sensor 5.0V A |
| C54 | SEN_6V3 | Sensor 6.3V |
| C55 | SEN_5V0_B2 | Sensor 5.0V B |
Software and context
M1 Tune configures supported packages, while M1 Build is used to develop packages. ECU and logging features depend on installed licences. MoTeC downloads; MoTeC model index.