Tuning Wiki

The historic Omex 100 has been described by owners as a programmable ignition controller, including a documented installation on a converted Peugeot engine. Treat it as an ignition-management identity, not proof of a fuel-injection ECU. Owner's Omex 100 installation account · period ignition-controller description. The exact output capability and hardware variants need confirmation from Omex.

Serial communications

Race Technology groups Omex 100 and 500 in an interface guide requiring ECU firmware G1.31 for its documented serial protocol. The listed possible data includes RPM, temperatures, voltage, throttle and ignition advance; the guide states availability depends on ECU and vehicle. These shared data-channel names do not establish fuel-injector drivers on the 100. Race Technology Omex 100 and 500 telemetry reference.

Wiring and identification

No complete manufacturer Omex 100 model-specific engine connector pinout was confirmed in the sources reviewed. Record label, serial, firmware and original loom; obtain the exact diagram from Omex before connecting it. Do not assume the 200 or 500 wiring applies. Omex family index.

Directly applicable articles

Technical articles assigned to this context will appear here.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.