Tuning Wiki

Autronic SM4DC is a standalone or earlier programmable engine-management system. SM4 dual-calibration version provides switch-selectable calibrations. Autronic identifies pin 39 as calibration select instead of the normal HSI3 function. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Processor

Autronic's SM4 product page (manufacturer documentation) gives a 16-bit Intel microcontroller running at 20 MHz. The exact part number is not stated in the sources checked.

Engine applications

The SM4DC is a universal ECU, not tied to specific vehicles. Autronic positions the SM4 family primarily for high-performance motorsport, with road-car use restricted where emission rules apply, and supports most reciprocating engines of 1 to 16 cylinders plus two-rotor rotary engines. Manned-aircraft use is prohibited. No engine codes are listed by the manufacturer.

Connector pinout

The 42-position function table is on the Autronic SM4 connector pinout page, which covers the SM4, SM4DC and SM4 Marine versions with the standard SM4 loom (manufacturer documentation; diagram redrawn by Tuning Wiki). On this dual-calibration version pin 39 selects calibration rather than HSI3. Use the original connector drawing for orientation and output limitations.

Further information

Sources

Directly applicable articles