Tuning Wiki
Cosworth Pectel SQ7Di ECU
SQ7Di product photo: Cosworth; used with permission.

The SQ7Di combines engine control with direct-injection drivers for up to six cylinders. Its listed configuration includes six boosted GDI injector drivers and two low-side injector drivers. Cosworth product information.

Identification and control

The manufacturer document identifies the Bosch HDEV5 injector and HDP5 pump/MSV application, Tyco connector hardware and specific injector firing-order requirements; review the complete document before wiring. ECU part number 01E-501070. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.

Connectors and wiring

Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.

Complete documented connector schedule

All 121 positions, signal names and recommended wire sizes below follow Cosworth SQ7Di product information 29E-071702-1bE. The document identifies the ECU connector as Tyco 1241434-3 with mating connectors 1355171-1 and 1355172-1. Confirm the actual hardware, cavity view, specific injector type, firing order and output ratings in the complete manufacturer sheet before connecting.

The sheet repeats several source signal labels on multiple pins, including INJLS7 at positions 6 and 25, PWM 1–8 and various GDI drivers. They are reproduced exactly; do not assume that repeated labels establish internal electrical links. Ask Cosworth to verify the build if uncertain.

PinSignal name in sourceRecommended wire size
1ENG GND14AWG
2ENG GND14AWG
3ENG GND14AWG
4BATPOS14AWG
5BATPOS14AWG
6INJLS722AWG
7INJLS822AWG
8PWM 122AWG
9PWM 222AWG
10PWM 322AWG
11PWM 422AWG
12PWM 522AWG
13PWM 622AWG
14PWM 722AWG
15PWM 822AWG
16PWM 922AWG
17PWM 1022AWG
18HB1A22AWG
19HB1B22AWG
20HB2A22AWG
21HB2B22AWG
22AIN124AWG
23AIN224AWG
24AIN324AWG
25INJLS722AWG
26INJLS822AWG
27PWM 122AWG
28PWM 222AWG
29PWM 322AWG
30PWM 422AWG
31PWM 522AWG
32PWM 622AWG
33PWM 722AWG
34PWM 822AWG
35AIN KNOCK224AWG
36AIN KNOCK124AWG
37HB1A22AWG
38HB1B22AWG
39HB2A22AWG
40HB2B22AWG
41AIN 424AWG
42AIN 524AWG
43AIN 624AWG
44DIN124AWG
45DIN224AWG
46DIN324AWG
47DIN424AWG
48N/C--
49N/C--
50DIN924AWG
51DIN824AWG
52CANHC24AWG
53CANLC24AWG
54CANHC24AWG
55CANLC24AWG
56ENG GND--
57N/C--
58N/C--
59DIN524AWG
60DIN624AWG
61DIN724AWG
62DIN1024AWG
63CRANK124AWG
64CAM24AWG
65CRANK224AWG
66AIN 724AWG
67AIN 824AWG
68AIN 924AWG
69AIN 1024AWG
70AIN 1124AWG
71EXTGND 422AWG
72LAMBDA-VS224AWG
73LAMBDA-VS124AWG
74LAMBDA-IP224AWG
75LAMBDA-IP124AWG
76N/C--
77N/C--
78EXTGND124AWG
79EXTGND224AWG
80EXTGND324AWG
81AIN1224AWG
82CDI824AWG
83CDI724AWG
84CDI624AWG
85CDI524AWG
86CDI424AWG
87CDI324AWG
88CDI224AWG
89CDI124AWG
90INJLS322AWG
91INJLS322AWG
92INJLS622AWG
93INJLS622AWG
94INJHS622AWG
95INJHS622AWG
96INJHS322AWG
97INJHS322AWG
98ETHER-TX -CAT5e
99CANHA24AWG
100ETHER-RX -CAT5e
101COMMS SCR--
102RS232-TX24AWG
103CANHB24AWG
104EXTPSU122AWG
105EXTPSU222AWG
106ETHER-TX +CAT5e
107CANLA24AWG
108ETHER-RX +CAT5e
109COMMS GND24AWG
110RS232-RX24AWG
111CANLB24AWG
112TC1POS24AWG
113TC1NEG24AWG
114INJLS114AWG
115INJLS414AWG
116INJHS514AWG
117INJLS214AWG
118INJHS414AWG
119INJLS514AWG
120INJHS114AWG
121INJHS214AWG

Software and support

Cosworth's Pectel application notes cover model-specific strategies; confirm toolchain and access level with the supplier. See the Cosworth Pectel and Antares family for related controllers.

Directly applicable articles

Technical articles assigned to this context will appear here.