The Bosch Motorsport ABS M4 Kit Porsche Cup is an M4 competition ABS kit with Porsche Cup-specific wiring and a wheel-speed signal splitter. Bosch’s historic catalogue identifies versions for the Porsche 997 Cup and 991 Cup race cars. This is an aftermarket motorsport kit, not proof of original factory installation or compatibility with road-going 911 models. Bosch Motorsport 2016 catalogue, pp. 364–365.
Documented applications and identification
| Kit application | Historic Bosch order number | Documented sensor arrangement |
|---|---|---|
| Porsche 997 Cup | F 02U V00 289-98 | DF11S system; Porsche-specific sensors and splitter included |
| Porsche 991 Cup | F 02U V00 543-11 | DF11i system; series sensors retained, with supplied signal splitter |
The 2017 Bosch 991 Cup installation instruction explicitly covers Gen 1 and Gen 2 and identifies differences between their installations. The 2016 catalogue predates the later Gen 2 kit and does not establish that a single catalogue order number covers every later kit: check the actual Bosch part number and generation. Bosch M4 Porsche 991 Cup installation instructions, V5; Bosch 2016 catalogue.
Connector information
The Porsche-specific installation document identifies loom assemblies and the wheel-speed splitter, but does not establish an ECU cavity-by-cavity table for every Porsche Cup kit. The standard M4 ECU connector reference is sourced to a different M4 diagram; do not assume its harness interchangeability with this kit. Bosch warns that an M4 loom can damage an M5 unit.