Tuning Wiki
MaxxECU Audi S2 (3B) plug-in kit
MaxxECU Audi S2 (3B) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.

MaxxECU Audi S2 (3B) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.

Identification and scope

Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.

Vehicle and ECU functions

Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.

OEM optionsMaxxECU IOSTREETV1/RACE/PRO
Fuel pumpGPO 1YesYes
TachometerGPO 8YesYes
Idle solenoidINJ 6YesYes
Engine fanVehicle controlYesYes
Boost solenoidGPO 2YesYes
Vehicle speed-NoNo
AC-NoNo
AC request-NoNo
Bluetooth ( MDash)-NoYes
Knock sensor(s)-NoNo
EGT option-Yes, externalYes, direct

Additional connector

The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.

PinDescriptionUsageNote
1Wide band (VREF)
2Wide band (VS)
3Wide band (SHIELD)
4Wide band (H-)
5INJ 7OutputNot available on MaxxECU STREET
6INJ 8OutputNot available on MaxxECU STREET
7GPO 7/DIN 3Output or digital inputNot available on MaxxECU STREET
8GPO 4OutputNot available on MaxxECU STREET
9Wide band (IP)
10Wide band (RCAL)
11+12VOutput
12+12VOutput
13Engine GND
14AIN 1temperature input
15AIN 2temperature input
16AIN 30-5V analog input

Installation and verification

The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.

Documents

Sources reviewed 17 November 2026.

Directly applicable articles

Technical articles assigned to this context will appear here.