Maserati's Biturbo, introduced in 1981, was the first production road car with twin turbochargers. This hub gathers the wiki's pages on the Biturbo family and the twin-turbo V6 and V8 cars built from it up to the late 1990s. Later Ferrari-era Maserati engines will be added separately.

Start here
- Models, years, engines and fuelling – every coupé, saloon, Spyder and 228 variant with power and units.
- Engines and AM codes – 18-valve and 24-valve V6, and the 3.2 V8.
- Quattroporte IV and 3.2 V8 service intervals and faults – belt and chain intervals, crankshaft end-float fault, shared V8 notes, Shamal manual contents.
- Injected-car engine management explained – speed-density fuelling, sequential injection, integrated knock and boost control, sensor roles, wiring component list.
- ECU, sensor and turbo part numbers – factory numbers for Marelli ignition units, Weber injection units, coils, sensors, injectors, boost solenoid and turbos.
- 24-valve V6 and Shamal V8: management, service and conversions – dual-ECU Ghibli system, belt and chain intervals, faults, roller-bearing turbos, tuning conversions, 36-valve prototype.
- Factory service data – Weber 36 DCNVH jetting, distributor and ignition data, spark plugs, valve clearances, fuel pressure, idle speed and CO, injected-car ECUs.
- Maintenance schedule, torque figures and IAW 04C tester checks – timing belt at 40,000 km, engine torques, injection ECU fault checks.
- Engine specification table and service notes – compression, bore and stroke per engine, 2.24v data, early-car faults, Shamal notes.
- Factory history, market variants and carburettor 425 troubleshooting – year-by-year changes, MABC from engine 3001, US Weber 34, owner faults.
- Fuelling and ECU – Weber carburettors, Weber-Marelli IAW injection and ignition.
- Technical specifications, ECU identification and service references – baseline engine data, IAW identification leads, Quattroporte IV belt and chain intervals.
- Ignition, sensors and standalone ECU conversion notes – odd-fire trigger pattern, sensor values, injectors.
- MABC boost control and tuning – how the system works, P/F/K adjustments, ways boost is raised, intercooling and water injection.
- Common faults, maintenance and repair.
- Shamal, Ghibli II, Quattroporte IV, Karif and Barchetta.
Quick reference
| Era | Fuelling | Typical cars |
|---|---|---|
| 1981–86 | Weber twin-choke carburettor, MABC from 1983 | Biturbo, S, E, ES, 420, 425, early Spyder |
| 1986–93 | Weber-Marelli injection and ignition, 18 valve | Biturbo i/Si, 222, 228, 430, Karif, Spyder i |
| 1988–98 | 24-valve DOHC, Marelli IAW | 2.24v, 4.24v, 222 4v, 430 4v, Ghibli II, Shamal V8, Quattroporte IV |
Photo gallery






More photographs are on the models page (222E, 2.24v, 425, Spyder i) and the derivatives page (Karif, Shamal, Barchetta, Ghibli II and Open Cup, Quattroporte IV).
Other Maserati pages
- Maserati Biturbo: models and engines (illustrated overview)
- Maserati: history and cars
- Quattroporte generations
- Maserati diagnostic tools
- Meatball, an LS-swapped Biturbo
Most model and engine figures come from encyclopaedia, manufacturer and enthusiast sources that disagree in places; the individual pages flag those conflicts. ECU connector pinouts and map data are still missing and contributions with evidence are welcome.