Tuning Wiki

MegaSquirt-III is a MegaSquirt-family engine-management product. Third-generation MegaSquirt family. MS3X is an optional expansion with a separate connector, and is not present on every MS3 installation. Model source.

Identification and software

Record the ECU label, processor generation, board revision, firmware and installed hardware modifications. Calibration software and firmware must match the hardware. DIYAutoTune software and firmware · Model-specific information.

Wiring and pinout

Use the matching model document and wiring or support reference; the manufacturer manual index distinguishes wire-in and vehicle-specific variants. Check connector orientation, wiring changes, fuse ratings and output configuration before connecting loads; matching cases or software families do not establish identical pin functions.

See the MegaSquirt and MS3Pro family guide. Sources reviewed 17 November 2026.

Directly applicable articles

Technical articles assigned to this context will appear here.