Tuning Wiki

The Adaptronic eMod006 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Nissan R34 Skyline GTT. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.

Application and installation

Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.

Model-specific pinout

In the eMod006 section of the manufacturer download archive, find: Nissan_R34GTT_Pinout.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: not listed in the archive.

Documentation limits

Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.

R34 GT-T manufacturer connector illustration and photograph

Illustrations: Adaptronic, preserved in the Haltech Adaptronic archive, reproduced with permission. Each manufacturer sheet includes a product photograph, connector orientation, factory function, Adaptronic function and manufacturer comments.

Adaptronic identifies the application as the Nissan Skyline R34 GT-T RB25DET and states the ECU does not work with factory traction control. The illustration is viewed looking into the ECU.

R34 Skyline GT-T RB25DET — open the full-size manufacturer connector diagram and table.

R34 Skyline GT-T RB25DET Adaptronic connector diagram and pin table

Source limitations: The manufacturer sheet lists pins 101–124 except 115 and pins 1–47 only. It labels two positions 53 on the connector drawing and does not label a position 73. The missing entries and duplicate must be independently confirmed; they have not been inferred from another model.

Original: R34 GT-T manufacturer pinout ZIP.

Directly applicable articles

Technical articles assigned to this context will appear here.