Tuning Wiki

The 9M4i is an ignition-only controller for up to four cylinders, not a fuel-injection ECU. SBD describes four configurable ignition drives and says it supersedes the 9A4i with the same pinouts and instructions. Source and identification.

Wiring and pinout

Model wiring documentation: 9A4i diagram linked on the 9M4i product page. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.

Configuration and support

For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.

Evidence limits

Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.

Complete documented 36-way connector

These positions are from SBD's 9A4i 36-way pin list. SBD's 9M4i product page says the 9M4i uses the same pinouts and instructions as the 9A4i. Both are ignition-only models. Verify the connector view, programmable input/output configuration, coil driver type and electrical limits in the original.

PinGeneral function
1N/A
2Water Temp
3Air Temp
45VA Ref
50VA
6Power Ground
7Power Ground
8CANL
9CANH
10Permanent 12V Supply (Battery)
11Crank Return
12Crank Signal
13Switched 12V Supply (Key)
14N/A
15Ignition D (4th to fire)
16Programmable Low Side Output Pin*
17Programmable Low Side Output Pin*
18Ignition B (2nd to fire)
19Programmable Input Pin*
20TPS
21MAP
225VA Ref
230VA
240VA
25Programmable Input Pin*
26N/A
27Programmable Input Pin*
28Baro
29N/A
30Cam Signal
31Cam Return
32N/A
33Programmable Low Side Output Pin*
34Programmable Low Side Output Pin*
35Ignition C (3rd to fire)
36Ignition A (1st to fire)

Directly applicable articles

Technical articles assigned to this context will appear here.