ABS and traction systems directory · Bosch · ATE / Teves / Continental · Other manufacturers · Motorsport and standalone
Bosch supplied several generations of anti-lock braking, traction and electronic stability systems. The family number alone does not identify the hydraulic unit, software or functions fitted to a particular vehicle. Read the complete label and diagnostic identification, including suffixes and both vehicle-maker and Bosch part numbers.
Production system names
| System | Evidence and identification |
|---|---|
| Bosch II ABS | Snap-on's VW/Audi communication manual lists Bosch II ABS for selected older Audi applications. It is an ABS designation, not an assumption of traction or stability control. Snap-on, pp. 80–81. |
| Bosch 5.0 | Listed as ABS/EDL on the 1996–97 Audi A6 in the same guide. Its VW table also includes 5.0 variants. |
| Bosch 5.3 | The guide identifies ABS/EDL/ASR/ESP system descriptions and lists 1998–2002 Audi A4/A6/A8 examples; functions depend on vehicle and configuration. It also lists individual 5.3 ABS/EDS and ESP variants. Snap-on, pp. 79–81. |
| Bosch 5.7 | Listed with ABS/EDL/ASR/ESP descriptions for selected 2002–04 A4 applications, with separate front-drive and all-wheel-drive entries. Confirm the exact unit. Snap-on, pp. 79–81. |
| Bosch 8.0 | Škoda Roomster workshop material distinguishes ABS 8.0 from ABS/TCS/ESP 8.0. Bosch's ESI application list also identifies ESP 8.0 VAR 1; the suffix and configuration matter. Škoda brake guide contents; Bosch ESI application list. |
| Bosch 8.2 / 8.2i; 9.0 / 9.0i | For the 2010 Polo, VW's brake guide separates 8.2 and 9.0 ABS from 8.2i and 9.0i ABS/EDS/ASR/ESP. Do not drop the “i” or assume the same feature set. VW Polo brake guide contents, p. 3. |
Unconfirmed name: Bosch 6.1 ESP
The exact brake-system designation “Bosch 6.1 ESP” has not been established from the sources checked. Do not identify a unit from that phrase alone. Obtain a clear label, complete part number, vehicle/VIN and scan-tool identification. Bosch also uses 6.1 for unrelated products and software, so a matching number on its own is insufficient.
Workshop identification
- Record the vehicle model, market, year, VIN and installed equipment.
- Record every supplier and vehicle part number on both hydraulic block and electronic module, plus software and coding read with a suitable tester.
- Compare the connector, hydraulic ports, sensors and vehicle-specific documentation. Use the manufacturer's procedures for replacement, coding, bleeding and calibration; a shared family name does not establish interchangeability.
For competition-specific ABS M4 and M5, see the motorsport and standalone guide.