Tuning Wiki

Bosch ECUs in the catalogue

Current catalogue identities from TuningService. Select an ECU for its recorded part numbers, applications and wiki references.

2 catalogue records

Open Bosch catalogue

Vehicles and engines in the Bosch application catalogue

The following listings are printed against this exact management designation in the Bosch Australia vehicle component applications catalogue. The dates are that catalogue's production window for the listing. They do not show that every market, body style or software version used the same ECU, and they do not establish a part number or pinout. Listings that printed more than one designation are omitted.

VehicleEngine codeBuild datesPrinted system
Audi 80NG1991–1996KE-Jetronic (KE3.2)
Audi 90NG1988–1991KE-Jetronic (KE3.2)
Audi 100NF1986–1990KE-Jetronic (KE3.2)

Source: Bosch Vehicle Component Applications, independent PDF mirror; accessed 2026-11-17.

ECU and connector

The jetronic.org enthusiast reference describes KE3-Jetronic from 1986 as a digital ECU with configuration switches that change the engine map, basic diagnostic functions and on-board air-fuel and idle control, and gives KE3.2 a 35-pin connector (KE3.1 has 25 pins). Neither that source nor any other consulted names the microcontroller, and no pinout was found. Single-source, unverified against Bosch documentation.

Indexed under Bosch KE-Jetronic; see also KE3.1.

Sources

Directly applicable articles

Technical articles assigned to this context will appear here.