Tuning Wiki

GEMS X25: A historical GEMS ECU identity mentioned in the manufacturer's technical forum. Manufacturer source.

Hardware and control

A GEMS discussion distinguishes X25 sensor raw values from the EM36/EM40 context. It does not provide a complete X25 connector pinout or establish compatibility with other GEMS units. GEMS model information.

GEMS systems use GWv4 configuration, with the required ECU definition and licence; software options and custom builds can differ. Record the label, hardware and firmware and confirm connected devices against the matching documentation. GWv4 manual.

Connector and wiring

A verified complete model-specific connector pinout was not identified in the reviewed public material. Obtain the specific drawing and build information from GEMS; do not assume the wiring of a similarly named controller.

Further references

Sources reviewed 17 November 2026.

Directly applicable articles

Technical articles assigned to this context will appear here.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.