Two engine controllers
Denso's current gasoline range names an engine control ECU that times fuel injection and ignition. That controller is on Denso petrol. The diesel controllers are a separate history. Denso's 2007 common-rail manual, document 00400534E, splits them into the ECD-V distributor systems and common rail, and both sit under Denso diesel.
Denso's own account of the gasoline side starts in 1967, when it chose electronic fuel injection with one injector output per cylinder, and chose to make the semiconductors itself. It records Toyota's approval for mass production in 1972. The diesel manuals from 2000 and 2007 call the diesel systems ECD, electronically controlled diesel. The letters ECD on a diesel pump manual are not the name of the gasoline ECU.
What the part number is
A Toyota engine-computer number in the 89661 series is Toyota's number. On the Prado 1KD bulletin the matching Denso numbers are 175800-7251 and 175800-7242. A Mitsubishi 1860 number on the Triton bulletin matches a Denso MA275800 number. The supplier's number is the one that places the controller.
The supply pumps HP0, HP2, HP3 and HP4, and the injector generations, are the fuel system. They are already set out on common-rail diesel fuel systems. A later pump does not, by itself, rename the ECU.
Sources
- Denso, 75-year history. Electronic fuel injection research from 1967 and Toyota mass-production approval in 1972. Electronic control history. Accessed 2026-11-13.
- Denso, engine ECU product page. Gasoline injection and ignition. Engine ECU. Accessed 2026-11-13.
- Denso, Common Rail System operation, document 00400534E, September 2007. ECD-V and common rail. Mirror: 00400534E.