
Product photograph: Cosworth. Used with permission.
Cosworth Pectel motorsport ECUs include configurable engine and powertrain control. Product features, software permissions and championship configurations can vary.
Models
- Historic Pectel T10s; Cosworth identifies MQ12 as its replacement in 2008.
- SQ6, SQ6M and SQ6M12.
- MQ12 and MQ12Di.
- SQ7Di, a direct-injection ECU for up to six cylinders.
Evidence: MQ12 product page and Cosworth product archive; SQ7Di product page includes a product image. IDU1 is an injection driver, not a standalone ECU.
Individual model references
Follow each model link for scope, sources and connector information. Similar model names do not establish compatible pinouts or software.
- Earlier Pectel: T2, T6 and T10s.
- SQ: SQ6, SQ6M, SQ6M12 and SQ7Di.
- MQ: MQ12 and MQ12Di.
- Antares: Antares 4, Antares 6, and Antares 8 variants 810, 820, 830, 840 and 850.
Choosing and identifying Cosworth controllers
| Model | Identification and documented differences | Source |
|---|---|---|
| T2 | Historic four-cylinder controller; period Pectel sheet describes four high-impedance injector drivers and two ignition channels. | Pectel sheet mirror |
| T6 | Earlier controller; AiM documents a 55-position connector and RS232 link. | AiM T2/T6 |
| T10s | Earlier range-topping ECU; Cosworth dates its MQ12 replacement to 2008. | MQ12 history |
| SQ6 | 12 injector, eight IGBT and eight logic ignition drivers; 88-way connector. | SQ6 sheet and pinout |
| SQ6M | 12 injector, eight IGBT and eight logic ignition outputs; Autosport connectors and 4 MB logging. Optional paddle shift. | SQ6M |
| SQ6M12 | 12 peak-and-hold injector, 12 IGBT and four logic ignition outputs; suitable for one to twelve cylinders. | SQ6M12 sheet and pinouts |
| SQ7Di | Integrated direct injection driver and ECU, six boosted GDI outputs; two low-side injector outputs. | SQ7Di sheet and pinouts |
| MQ12 | 20 configurable injector/PWM, 12 IGBT and 16 logic ignition outputs; up to twelve-cylinder fuelling. | MQ12 sheet and pinouts |
| MQ12Di | GDI/port or combined control; the manufacturer identifies it as a successor development to separate MQ12 and IDU1 hardware. | MQ12Di |
| Antares 4 / 6 / 8 | Cosworth CHP2-based family with multiple I/O, logging and configuration options. Product-specific outputs and available features vary; two manufacturer documents give different Antares 4/6 counts, so verify the exact build. | Family overview · Antares 8 sheet |
Software and supported options
Hardware drivers can be shared or have build-specific electrical limits. Cosworth documents optional strategies, championship locking, and application-specific software on different products. Antares uses Pi Caltool for calibration, Pi Toolbox for analysis and Pi Toolset for logging/device configuration; selected Antares variants support additional Auto Coding. Cosworth software descriptions and Pectel application notes.
Pectel SQ6 — 88-way connector
For SQ6 part 01E-500700 / gearbox upgrade 01E-500700-E011, product information 29E-071516-4E; diagram is view looking into the 88-way connector. The source identifies higher-current pins using shading; consult it for ratings and alternate functions. SQ6 product information and diagram
| Pin | Function |
|---|---|
| 12, 13, 72, 73, 40, 42, 43, 14, 15, 16 | AIN1–AIN10 respectively |
| 71, 41, 70 | TC1 positive, TC2 positive, TC negative |
| 68, 38, 69, 39 | Lambda V1, current pump 1, V2, current pump 2 |
| 10, 11 | Knock DET1, DET2 |
| 46, 18, 17 | Crank 1, crank 2, cam |
| 78, 77, 48, 21, 20, 47, 19, 76 | Digital inputs 1–8 respectively |
| 36, 66 | RS232 TX, RX |
| 75, 45, 74, 44 | Ethernet TX+, TX−, RX+, RX− |
| 37, 67, 8, 9 | CAN1 low, CAN1 high, CAN2 low, CAN2 high |
| 55, 88, 87, 86, 85, 54, 84, 52, 83, 82, 81, 80 | Injector outputs 1–12 respectively |
| 26, 25, 22, 28, 27, 53, 51, 50 | IGBT ignition outputs 1–8 respectively |
| 56–63 | Logic-level ignition outputs 1–8 respectively |
| 34, 6, 33, 2, 4, 31 | PWM outputs 1–6 respectively |
| 30, 5, 1, 29 | H-bridge HB1A, HB1B, HB2A, HB2B |
| 32, 3 | H-bridge HB3A, HB3B |
| 65, 64 | Programmable 5 V / 12 V sensor supplies |
| 35, 7, 79 | Analogue ground, crank/cam ground, digital ground |
| 24, 23 | ECU battery negative, engine ground |
| 49 | ECU battery positive |
Other units use different connectors: SQ6M12 connector pinout and SQ7Di pinout.
Confirm the exact ECU, hardware revision and connector orientation before wiring. Configurable functions and electrical limits are model-dependent; consult the linked original diagrams.