Tuning Wiki
Haltech Elite PRO Ford Falcon Barra plug-in ECU
Haltech Elite PRO Ford Falcon Barra plug-in ECU. Image: Haltech, reproduced with permission.

Haltech's downloads page lists Elite Falcon as a distinct ESP ECU firmware family. A Haltech product notice separately refers to an Elite Falcon Pro Plug-in; the relationship of every Elite Falcon firmware package and product variation has not been established in this reference. Haltech firmware index; Elite range notice.

Identification and wiring

Record the full label, ECU part number, serial, firmware and factory connector; verify the exact Falcon application with Haltech. A complete pinout, applicable vehicle range and specifications were not verified for the firmware family as a whole. Do not use a different Elite model's pin assignments by assumption. Search the manufacturer's guides and downloads for the actual part number.

See Haltech ECU index.

Auxiliary connector: manufacturer diagram

Haltech's Elite PRO Ford Falcon I6 Barra quick-start guide illustrates this 34-position auxiliary connector and the optional LSU 4.9 harness. Positions 18–23 below are shown as the corresponding sensor connector cavities in the guide, not inferred electrical function names. Confirm connector view and the actual loom before wiring. CAN polarity is not separately labelled on the illustrated diagram. The factory vehicle connector is not covered by this auxiliary table.

Auxiliary pinDocumented connection
1CAN connection (white; confirm CAN polarity against the harness)
2CAN connection (blue; confirm CAN polarity against the harness)
3+12 V sensor / relay supply
4Signal ground
5Digital pulsed input 1
6Digital pulsed input 2
7Digital pulsed input 3
8Digital pulsed input 4
9+5 V sensor supply
10Injector 1 / DPO 1
11Injector 2 / DPO 2
12Injector 3 / DPO 3
13Injector 4 / DPO 4
14Injector 5 / DPO 5
15Injector 6 / DPO 6
16Injector 7 / DPO 7
17Injector 8 / DPO 8
18Wideband LSU 4.9 sensor cavity 4 (grey)
19Wideband LSU 4.9 sensor cavity 2 (yellow)
20Wideband LSU 4.9 sensor cavity 1 (red)
21Wideband LSU 4.9 sensor cavity 6 (black)
22Wideband LSU 4.9 sensor cavity 3 (white)
23Wideband LSU 4.9 sensor cavity 5 (green)
24Analog voltage input 1
25Analog voltage input 2
26Not used in the shown harness
27Not used in the shown harness
28Not used in the shown harness
29Not used in the shown harness
30Not used in the shown harness
31Not used in the shown harness
32Analog voltage input 3
33Analog voltage input 4
34Signal ground

The guide describes the injector channels as usable for staged injection or digital pulsed outputs; consult it for configuration and current limits. “Not used” describes the illustrated harness only.

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.