Pro-Flo 4 is an application-specific sequential port-injection system: its matched intake manifold has individual fuel injectors, fuel rails, throttle body and separate ECU. Many retrofit kits replace the carburetted intake manifold as well as the carburettor; a 4150-style throttle body does not make this a throttle-body injection conversion. Edelbrock lists small- and big-block Chevrolet, Ford, Mopar, AMC, Pontiac and cable-throttle Gen III/IV LS applications in its FAQ. Check the exact head, manifold, distributor, trigger and part number. See Edelbrock’s system description.

Controller, wiring and selection
The separate ECU works with an application-specific engine harness and sensors; the mobile E-Tuner software communicates with the ECU rather than replacing it. Follow the exact kit’s manual for connector orientation, fuel pressure, relays, injector and ignition hardware. A complete numbered ECU connector pinout has not yet been verified for this page.