
The Antares 8 combines Cosworth engine control and chassis/data logging. Its published sheet lists eight GDI drivers and sixteen configurable injector/PWM drivers, eight IGBT and twelve logic ignition outputs. Cosworth product information.
Individual variants
The manufacturer matrix identifies 810, 820, 830, 840 and 850. They differ in memory, CAN ports, pressure measurement and developer licence options; verify ordered hardware and software.
Identification and control
Documented scope includes GDI on up to eight cylinders and port injection on up to twelve, including combined GDI/port on up to eight. The detailed manufacturer information sheet includes pin allocations and wiring guidance, with variant-dependent facilities. Document the exact part number, serial, software build, calibration, championship configuration and any security or software option before assessing compatibility.
Connectors and wiring
Review the model-specific Cosworth document and request the current build sheet where necessary. Connector and driver assignments may be model-, build- and configuration-dependent. Sensor supplies, peak driver currents, earths and high-voltage injector circuits must be matched to the official document.
Software and support
Cosworth's Pectel application notes cover model-specific strategies; confirm toolchain and access level with the supplier. See the Cosworth Pectel and Antares family for related controllers.
Antares 8 connector pin assignments
These 264 labelled connector positions follow the Cosworth Antares 8 information sheet, document 29E-501120-P rev 4.1. This is the family connector allocation: the manufacturer's variant matrix limits features including CAN, Ethernet/EtherCAT, logging and measurements by build and licence. A listed pin does not prove that the function is fitted or enabled on every 810–850 unit. Match the exact model, build sheet, software, connector view and wiring limits with Cosworth.
The source groups some H-bridge and ignition labels over pairs of positions; the same channel name is shown against each position in those cases. Consult the manufacturer for pairing, current and injector drive combinations before wiring.
C1 connector
| Pin | Signal or alternative function in source |
|---|---|
| C1-1 | INJLS2/PWM4 |
| C1-2 | INJHS2/PWM3 |
| C1-3 | IGN4/PWM46 |
| C1-4 | INJLS1/PWM2 |
| C1-5 | INJHS1/PWM1 |
| C1-6 | BATT- |
| C1-7 | IGN4/PWM46 |
| C1-8 | IGN3/PWM45 |
| C1-9 | IGN2/PWM44 |
| C1-10 | INJHS4/PWM7 |
| C1-11 | BATT- |
| C1-12 | BATT- |
| C1-13 | Serial2_TX_CTRL |
| C1-14 | IGN3/PWM45 |
| C1-15 | IGN2/PWM44 |
| C1-16 | IGN1/PWM43 |
| C1-17 | INJLS4/PWM8 |
| C1-18 | BATT+ |
| C1-19 | BATT- |
| C1-20 | BATT- |
| C1-21 | Serial2_RX_CTRL |
| C1-22 | SerialDBG_RX_LOG |
| C1-23 | IGN1/PWM43 |
| C1-24 | Serial1_TX_LOG |
| C1-25 | INJLS11/PWM19 |
| C1-26 | BATT+ |
| C1-27 | BATT+ |
| C1-28 | BATT- |
| C1-29 | BATT+ |
| C1-30 | SerialDBG_TX_LOG |
| C1-31 | DOUT2/PWM52 |
| C1-32 | Serial1_RX_LOG |
| C1-33 | ETHRX-1 |
| C1-34 | INJLS12/PWM20 |
| C1-35 | BATT+ |
| C1-36 | BATT+ |
| C1-37 | BATT- |
| C1-38 | BATT+ |
| C1-39 | DOUT1/PWM51 |
| C1-40 | DOUT4/PWM54 |
| C1-41 | ETHRX+1 |
| C1-42 | ETHTX-1 |
| C1-43 | INJHS3/PWM5 |
| C1-44 | BATT+ |
| C1-45 | HBB2/PWM36 |
| C1-46 | BATT- |
| C1-47 | CANH3_CTRL-LOG |
| C1-48 | DOUT3/PWM53 |
| C1-49 | HBA1/PWM33 |
| C1-50 | ETHTX+1 |
| C1-51 | INJLS3/PWM6 |
| C1-52 | HBB2/PWM36 |
| C1-53 | HBA2/PWM35 |
| C1-54 | BATT- |
| C1-55 | CANL3_CTRL-LOG |
| C1-56 | HBB1/PWM34 |
| C1-57 | HBA1/PWM33 |
| C1-58 | INJLS9/PWM17 |
| C1-59 | INJLS10/PWM18 |
| C1-60 | HBA2/PWM35 |
| C1-61 | BATT- |
| C1-62 | INJLS14/PWM22 |
| C1-63 | HBB1/PWM34 |
| C1-64 | INJLS15/PWM23 |
| C1-65 | INJLS16/PWM24 |
| C1-66 | INJLS13/PWM21 |
C2 connector
| Pin | Signal or alternative function in source |
|---|---|
| C2-1 | ECATTX+ |
| C2-2 | ECATRX- |
| C2-3 | ETH1000+4 |
| C2-4 | EXTPSU11 |
| C2-5 | EXTPSU12 |
| C2-6 | ECATTX- |
| C2-7 | ECATRX+ |
| C2-8 | ETH1000-4 |
| C2-9 | ETH1000-3 |
| C2-10 | EXTPSU13 |
| C2-11 | EXTPSU14 |
| C2-12 | CANL4_LOG |
| C2-13 | CANH4_LOG |
| C2-14 | CANL5_LOG |
| C2-15 | ETH1000+3 |
| C2-16 | ETH1000+2 |
| C2-17 | EXTPSU4 |
| C2-18 | EXTPSU2 |
| C2-19 | DOUT8/PWM58 |
| C2-20 | DOUT6/PWM56 |
| C2-21 | DOUT7/PWM57 |
| C2-22 | CANH5_LOG |
| C2-23 | ETH1000-2 |
| C2-24 | ETH1000+1 |
| C2-25 | EXTPSU3 |
| C2-26 | EXTPSU1 |
| C2-27 | AIN2 |
| C2-28 | AIN1 |
| C2-29 | AIN4 |
| C2-30 | DOUT5/PWM55 |
| C2-31 | DIN9/AIN49 |
| C2-32 | ETH1000-1 |
| C2-33 | DIN1/AIN41 |
| C2-34 | TCNEG2 |
| C2-35 | AIN30/LamTrim2 |
| C2-36 | AIN29/LamTrim1 |
| C2-37 | AIN5 |
| C2-38 | AIN6 |
| C2-39 | AIN3 |
| C2-40 | DIN10/AIN50 |
| C2-41 | DIN2/AIN42 |
| C2-42 | LAMVS1 |
| C2-43 | TCPOS2 |
| C2-44 | TCPOS1 |
| C2-45 | DIN6/AIN46 |
| C2-46 | KNOCK4 |
| C2-47 | KNOCK1 |
| C2-48 | KNOCK3 |
| C2-49 | LAMIP1 |
| C2-50 | KNOCK2 |
| C2-51 | TCNEG1 |
| C2-52 | DIN7/AIN47 |
| C2-53 | DIN4/AIN44 |
| C2-54 | DIN11/AIN51 |
| C2-55 | DIN5/AIN45 |
| C2-56 | DIN3/AIN43 |
| C2-57 | LAMVS2 |
| C2-58 | DIN8/AIN48 |
| C2-59 | DIN12/AIN52 |
| C2-60 | PROT-GND2 |
| C2-61 | CRANK2 |
| C2-62 | CRANK1 |
| C2-63 | LAMIP2 |
| C2-64 | PROT-GND1 |
| C2-65 | PROT-GND2 |
| C2-66 | CAM |
C3 connector
| Pin | Signal or alternative function in source |
|---|---|
| C3-1 | AIN26 |
| C3-2 | EXTPSU19 |
| C3-3 | ETH2_TX-/FM1 |
| C3-4 | AIN33/CPM1 |
| C3-5 | AIN27 |
| C3-6 | EXTPSU21 |
| C3-7 | ETH2_TX+/FP1 |
| C3-8 | ETH2_RX-/FM2 |
| C3-9 | ETH2_RX+/FP2 |
| C3-10 | AIN35/CPM3 |
| C3-11 | AIN28 |
| C3-12 | AIN32/LamTrim4 |
| C3-13 | CANL2_CTRL |
| C3-14 | CANH2_CTRL |
| C3-15 | CANL1_CTRL |
| C3-16 | CANH1_CTRL |
| C3-17 | AIN36/CPM4 |
| C3-18 | AIN34/CPM2 |
| C3-19 | AIN38/CPM6 |
| C3-20 | AIN31/LamTrim3 |
| C3-21 | AIN25 |
| C3-22 | AIN18 |
| C3-23 | AIN13 |
| C3-24 | AIN14 |
| C3-25 | KNOCK6 |
| C3-26 | AIN37/CPM5 |
| C3-27 | AIN39/CPM7 |
| C3-28 | AIN24 |
| C3-29 | AIN21 |
| C3-30 | AIN22 |
| C3-31 | AIN17 |
| C3-32 | AIN11 |
| C3-33 | AIN12 |
| C3-34 | KNOCK5 |
| C3-35 | KNOCK8 |
| C3-36 | AIN40/CPM8 |
| C3-37 | AIN23 |
| C3-38 | AIN20 |
| C3-39 | AIN16 |
| C3-40 | DIN16/AIN56 |
| C3-41 | AIN9 |
| C3-42 | AIN10 |
| C3-43 | KNOCK7 |
| C3-44 | PROT-GND3 |
| C3-45 | AIN8 |
| C3-46 | AIN19 |
| C3-47 | AIN15 |
| C3-48 | DIN15/AIN55 |
| C3-49 | EXTPSU18 |
| C3-50 | EXTPSU16 |
| C3-51 | PROT-GND3 |
| C3-52 | PROT-GND4 |
| C3-53 | AIN7 |
| C3-54 | DIN13/AIN53 |
| C3-55 | DIN14/AIN54 |
| C3-56 | ScopeOut2 |
| C3-57 | ScopeOut1 |
| C3-58 | PROT-GND4 |
| C3-59 | EXTPSU5 |
| C3-60 | EXTPSU6 |
| C3-61 | EXTPSU7 |
| C3-62 | EXTPSU15 |
| C3-63 | EXTPSU17 |
| C3-64 | EXTPSU8 |
| C3-65 | EXTPSU9 |
| C3-66 | EXTPSU10 |
C4 connector
| Pin | Signal or alternative function in source |
|---|---|
| C4-1 | INJHS6/PWM11 |
| C4-2 | IGN5/PWM47 |
| C4-3 | IGN6/PWM48 |
| C4-4 | INJHS5/PWM9 |
| C4-5 | INJLS6/PWM12 |
| C4-6 | IGN5/PWM47 |
| C4-7 | IGN6/PWM48 |
| C4-8 | IGN7/PWM49 |
| C4-9 | IGN8/PWM50 |
| C4-10 | INJLS5/PWM10 |
| C4-11 | BATT- |
| C4-12 | BATT- |
| C4-13 | BATT- |
| C4-14 | IGN7/PWM49 |
| C4-15 | IGN8/PWM50 |
| C4-16 | DOUT10/PWM60 |
| C4-17 | INJHS8/PWM15 |
| C4-18 | HBB5/PWM42 |
| C4-19 | BATT- |
| C4-20 | LIN1 |
| C4-21 | LAMVS4 |
| C4-22 | DOUT12/PWM62 |
| C4-23 | DOUT11/PWM61 |
| C4-24 | DOUT9/PWM59 |
| C4-25 | INJLS8/PWM16 |
| C4-26 | BATT- |
| C4-27 | BATT- |
| C4-28 | LIN2 |
| C4-29 | LAMIP3 |
| C4-30 | LAMVS3 |
| C4-31 | HBB4/PWM40 |
| C4-32 | HBA4/PWM39 |
| C4-33 | EXTPSU20 |
| C4-34 | INJLS19/PWM27 |
| C4-35 | BATT+ |
| C4-36 | HBA5/PWM41 |
| C4-37 | LAMIP4 |
| C4-38 | TCNEG3 |
| C4-39 | CANL6_LOG |
| C4-40 | HBB4/PWM40 |
| C4-41 | HBA4/PWM39 |
| C4-42 | EXTPSU22 |
| C4-43 | INJLS20/PWM28 |
| C4-44 | BATT+ |
| C4-45 | BATT+ |
| C4-46 | HBB3/PWM38 |
| C4-47 | TCNEG4 |
| C4-48 | CANH6_LOG |
| C4-49 | PROT-GND5 |
| C4-50 | PROT-GND5 |
| C4-51 | INJHS7/PWM13 |
| C4-52 | BATT+ |
| C4-53 | HBB3/PWM38 |
| C4-54 | HBA3/PWM37 |
| C4-55 | TCPOS3 |
| C4-56 | PROT-GND6 |
| C4-57 | PROT-GND6 |
| C4-58 | INJLS7/PWM14 |
| C4-59 | INJLS17/PWM25 |
| C4-60 | HBA3/PWM37 |
| C4-61 | TCPOS4 |
| C4-62 | INJLS21/PWM29 |
| C4-63 | INJLS22/PWM30 |
| C4-64 | INJLS18/PWM26 |
| C4-65 | INJLS23/PWM31 |
| C4-66 | INJLS24/PWM32 |