Tuning Wiki
Haltech Elite 550 ECU
Haltech Elite 550 (HT-150400) product photograph: Haltech product image library; reproduced with permission.

Haltech Elite 550 is a programmable engine-management ECU in Haltech's Elite family. Four-cylinder-oriented Elite with 1 analogue voltage input and no half-bridge outputs in Haltech's comparison. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparison
Injector channels4, peak-and-hold
Ignition channels4
Digital pulsed outputs5
MAP sensor4 bar internal
Tuning softwareESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Elite 550 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

34-way connector pinout

Transcribed from the Haltech Elite 550 complete pinout. Manufacturer wire-colour abbreviations are retained; a dash means no function is shown in the source. The * symbol identifies the manufacturer's default allocation, which may be configurable. Use the original diagram for connector orientation and electrical limits.

PinWire colour codeFunction
1V/BRDPO 2
2GY/Y <SHD>AVI 1 (* O2 Sensor)
3Y/BIGN 1
4Y/RIGN 2
5Y/OIGN 3
6Y/GIGN 4
7--
8--
9O+5V DC
10BBATTERY GROUND
11B/WSIGNAL GROUND
12GY <SHD>DPI 1
13--
14WTHROTTLE POSITION SENSOR
15YAVI 3 (* MAP )
16WCAN H
17LCAN L
18V/BDPO 1
19LINJ 1
20L/BINJ 2
21L/BRINJ 3
22L/RINJ 4
23V/RDPO 3
24B/YDPO 5 (* Fuel Pump Relay)
25V/ODPO 4
26R/L+13.8V ECU / INJECTOR PWR
27--
28--
29GYAIR TEMPERATURE
30VCOOLANT TEMPERATURE
31Y (GY 4C)TRIGGER +
32Y (GY/B 4C)HOME +
33G (GY 4C)TRIGGER -
34G (GY/B 4C)HOME -

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.