Tuning Wiki
Link G4X WRX4X plug-in ECU
Manufacturer product image of WRX4X application ECU: Link ECU. Permission to republish confirmed by the user.

Link G4X WRX4X is a vehicle-specific programmable plug-in ECU for the Subaru WRX version 3–4 application listed in Link's model-specific manuals index. It is an application board, rather than the universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's WRX4X installation manual.

Identification and installation

Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.

G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.

Pinout and tuning

The WRX4X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.

Manufacturer connector schedules

From Link's WRX4X installation manual (2025). Link states that its pinouts are viewed looking into the ECU from the wire side. A dash reproduces an unspecified source field; nc is Link's label. Applies to the V3–4 WRX/STi and the single-turbo-converted Legacy GTB layouts documented by Link. Trigger pins 52 and 54 are selected with the board DIP switches. Link says injector drives 7 and 8 are not exposed.

Factory main header positions

Factory pinLink ECU channelFactory function
1Injector 2Injection
51+12V Ignition SwitchControls Main Relay
2Injector 3Injection
52Trig 1 / Trig 2Triggers via Dip Switch
3Injector 4Injection
53Ground (Triggers)—
4Ignition 1Ignition 1&2
54Trig 2 / Trig 1—
5Ignition 2Ignition 3&4
55Ground (AFM)—
6Injector 5 (Aux)CE Light
56An Volt 2AFM Signal
7Injector 6 (Aux)Fuel Pump Relay
57An Volt 4Oxygen Sensor Signal
8nc—
58Knock 1Knock
9nc—
59An Temp 1ECT
10nc—
60+14V Main RelayECU Power
11Aux 3Wastegate Solenoid
61+14V Main RelayECU Power
12Aux 2ISC Open (ISC Solenoid)
62Main Relay Control—
13Aux 1ISC Close (ISC Slave)
63nc—
14Injector 1Injection
64nc—
15Ground—
65nc—
16Ground—
66Ground—
17Ignition 2Ignition 3&4
67An Volt 1Factory MAP Sensor
18Ignition 1Ignition 1&2
68An Volt 3TPS (Main)
19Aux 6A/C Out
69nc—
20nc—
70+5V Out—
21nc—
71Ground (Signal)—
22nc—
72Ground—
23Injector 6 (Aux)Fuel Pump Relay
24nc—
25nc (+12V constant)—
26Ground—
31Ignition 3 (Aux)Engine Fan
32nc—
33nc—
34nc—
35nc—
36DI 1Vehicle Speed
37DI 3Start Signal
38An Temp 2Factory IAT Sensor
39Ignition 4 (Aux)Engine Fan (High Speed)
40Aux 8Purge Solenoid
41Aux 4Tacho
42nc—
43nc—
44nc—
45DI 2A/C In
46DI 4Neutral Switch

Expansion connector

PinLink ECU channelFactory function
1Ground (Signal)—
2+5V Out—
3DI 5—
4DI 6—
5An Volt 5—
6An Volt 6—
7An Temp 4—
8An Temp 3—
9Ground (Signal)—
10+5V Out—
11DI 9—
12DI 10—
13An Volt 8—
14An Volt 9—
15Ignition 7 (Aux)—
16Ignition 8 (Aux)—

CAN 1/RS232 Connector

PinFunctionWire colour
1Comms GNDBrown
2CAN1 LGreen
3CAN1 HWhite
4RS232-RXGrey
5RS232-TXYellow

CAN 2/OBD Connector

PinFunctionWire colour
1GNDBrown
2CAN2 LGreen
3CAN2 HWhite
4NCGrey
5+14VYellow

Directly applicable articles

Technical articles assigned to this context will appear here.