The MoTeC Subaru Diff Controller family adjusts the centre differential clutch using vehicle inputs and, when configured, front-to-rear wheel-speed difference. It controls torque distribution; it is not a hydraulic ABS or an engine-cut traction controller.
SDC part 14009 replaces the factory DCCD controller where fitted. MoTeC lists Subaru WRX and STi 2002–2004, while its manual specifically identifies the 2003 WRX STi and similar vehicles. Confirm DCCD equipment, market, connector and exact module before ordering or fitting. MoTeC SDC product; MoTeC SDC manual, 22 February 2008.
The manufacturer describes selectable modes and adjustable slip, acceleration and braking tables; wheel-speed source and ABS input depend on the actual installation. MoTeC technical support.
Pinout
SDC 14009 40-pin connector reference includes confirmed positions and flags conflicting CAN documentation.