ABS and traction systems · Racelogic traction control · Motorsport overview
Racelogic Traction Control is a separate, discontinued traction system. The maker's documentation describes wheel-speed monitoring, injector-cut integration, setup software and adjustable slip control. It is not a hydraulic ABS. Racelogic legacy support; Racelogic traction manual v3.2.
Controls and installation
The manual covers connection to wheel-speed sensing and fuel injectors, and configuration for wheel and vehicle characteristics. A separate digital adjuster manual describes launch control and selection of slip settings. “v3.2” is the manual version, not proof of a hardware generation. Racelogic digital adjuster manual.
Check the unit's sensor-input variant and injector compatibility, and consult the original manual before connecting to an existing ABS system. Confirm the complete kit, safety implications and applicable competition rules.
Connector and application reference
Connector A and B pinout and documented installation examples — manufacturer pin assignments, TC8-only entries, injector and wheel-speed wiring, and examples from Racelogic fitting documentation.
Three-wheel-speed-sensor installations
The legacy V3.2 manual discusses vehicles with a single rear differential speed sensor, including the Nissan 200SX and some older Mercedes-Benz vehicles as examples. It says the system cannot automatically calibrate itself in that arrangement and requires calibration using its laptop software. This is a documented installation scenario, not a blanket fitment claim; verify the specific sensor and controller variant. Source: Racelogic traction-control manual V3.2, section 1.11.