Tuning Wiki
Browse Continental

ABS and traction systems · ATE, Teves and Continental · Motorsport overview

Continental Engineering Services describes RSX ABS as a competition brake system using a motorsport-adapted Continental MK 100 electronic hydraulic unit. Its manual specifies a front/rear circuit split with balance-bar master cylinders; RSX is a configured kit, not a synonym for every production MK 100. RSX ABS technical information manual, sections 3–4.

Kit and configuration

The manual lists the hydraulic/electronic control unit, inertial measurement unit, external pressure sensor, rotary switches, connectors and configuration/diagnostic software. It identifies an internal front pressure sensor and external rear pressure sensor in the documented configuration. Match the exact hardware, brake layout and software version with the manual and supplier.

Use and servicing

The RSX is a motorsport system and requires correct vehicle-specific commissioning. The cited manual recommends replacement of the electronic brake system after two years because of motorsport stress. Check the manual for the system in hand and applicable competition and road-use rules.

Connector pinout

RSX ABS HECU connector pinout covers the ABS-only diagram for kit HECU 3-75000-013; other MK100 versions may differ.

Related current product

AUMOVIO Engineering Solutions markets the related MK 100 UHP motorsport ABS. Confirm exact model, hardware and software before transferring any wiring or configuration between systems.