Tuning Wiki
Browse Bosch

ABS and traction systems · Bosch manufacturer directory

System identification

Bosch 5.7 is a production brake-control family. Snap-on lists Bosch 5.7 ABS/EDL/ASR/ESP for selected 2002–04 Audi A4, 2003–04 A4 Cabrio and other named Audi applications.

Documented examples and configuration

For the VW Passat 3B, Ross-Tech documents a separate brake-electronics procedure for 5.7 and identifies coding/basic-setting functions. VW's diagnostic example distinguishes front-drive and syncro 5.7 selections; this is not a guarantee of interchangeability.

Audi A6 Quattro component example

An Audi A6 Quattro service-manual reproduction describes Bosch 5.7 ABS/ESP with the ABS hydraulic unit N55 and controller J104 combined as a hydraulic control unit. In that documented installation the steering-angle sender G85 is at the steering-column slip ring; lateral-acceleration G200 and yaw-rate G202 are located below the radio. These locations and sensor arrangements are specific to the illustrated application, not every Bosch 5.7 variant.

Identification and service limits

Verify the fitted control-unit identity, exact part number, drivetrain, software and vehicle equipment before selecting a diagnostic or replacement procedure. A family code does not imply the same calibration or functions in every installation.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Sources