Tuning Wiki

The Adaptronic eMod017 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Mazda MX-5 Miata NB8B and NB8C. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.

Application and installation

Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.

Model-specific pinout

In the eMod017 section of the manufacturer download archive, find: MX5_NB8B_C_Pinout.zip. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: Basemap_NB8C_SE.ecu.

Documentation limits

Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.

MX-5 NB8B/NB8C connector assignments

From Adaptronic's MX5 NB8B/C pinout ZIP, preserved in the Haltech Adaptronic archive. The manufacturer sheet identifies the 2001–2005 naturally aspirated NB8B/C, the 2003–2005 NB8C-SE turbo and Australian 2001–2002 NB8B-SP turbo. Pin orientation is looking into the ECU; factory assignments and ECU functions can differ. See the sheet for factory functions, wire colours and vehicle-specific notes.

The sheet groups 2A–2AD as NC. It ends at 5AE, although the diagram also shows 5AF–5AH; these and other omitted positions remain unverified. Mod 1 and Mod 3 depend on the installed upgrade module. The manufacturer pinout includes a product photograph.

PinAdaptronic function
1AMod 3 (depends on installed module)
1BMod 1 (depends on installed module)
1CNC
1DMod 3 (depends on installed module)
1EMod 1 (depends on installed module)
1FNC
1GMod 3 (depends on installed module)
1HMod 1 (depends on installed module)
1JMod 3 (depends on installed module)
1KMod 1 (depends on installed module)
1LNC
1MMod 3 (depends on installed module)
1NNC
1ONC
1QMod 1 (depends on installed module)
1RNC
1SMod 3 (depends on installed module)
1TMod 1 (depends on installed module)
1UNC
1VNC
2A–2ADNC (grouped range as stated by manufacturer)
3AInjector output 1
3BIgnition output 5 (cooling fan)
3CIgnition output 6 (condenser fan)
3DInjector output 2
3ENC
3FNC
3GInjector output 3
3HNC
3INC
3JInjector output 4
3KIgnition output 7 (A/C relay)
3MECCS/fuel pump control output
3NAuxiliary output 2 (VTCS)
3OECCS/fuel pump control output
3P12 V power input
3QAuxiliary output 1 (idle)
3RAuxiliary output 4 (check lamp)
4APower ground
4BPower ground
4CInjector output 6
4DAuxiliary output 3
4EIgnition output 3
4FIgnition output 1 (cylinders 1 and 4)
4HECCS hardwired
4IIgnition output 2 (cylinders 2 and 3)
4JPower ground (front O2 heater)
4KExternal 0–5 V input 2
4LIgnition output 4
4MAlternator control
4NFuel pressure
4OTachometer
4PPower ground (rear O2 heater)
4QCAS 3
4SNC
4TVehicle speed input
4UNC
4VCAS 2 (cam)
4WNC
4XOil pressure
4YCAS 1 (crank)
4ZOil temperature
5APower ground
5BNC
5CDigital input 3 (power steering)
5DInverse of injector 8 (boost control)
5EInverse of injector 8 (connected to 5D)
5FDigital input 4 (A/C request)
5HDigital input 2 (clutch)
5IDigital input 1 (neutral)
5JInjector output 5 (VTCS vacuum switch)
5KInjector output 8 (boost SE / VVT positive NA)
5L5 V output
5MKnock input
5NManifold air temperature
5OSensor ground
5PCoolant temperature
5RInjector output 7 (VVT negative NA / spare turbo)
5SIgnition switch input
5TNC
5UTPS input 2
5VTPS input 1
5WOxygen input 1
5XIMAP
5ZCAN L
5AAOxygen input 2
5ABFuel temperature
5ACCAN H
5ADNC
5AEEMAP

Mazda MX-5 NB8B/NB8C manufacturer illustration

Open the scaled manufacturer pinout and product photograph. The image was proportionally reduced from the Adaptronic original to fit the wiki; source: Haltech's Adaptronic archive. Adaptronic illustration reproduced with permission. Consult the linked original ZIP for the unscaled source.

Scaled Adaptronic Mazda MX-5 NB8B/NB8C manufacturer connector pinout and ECU photograph

Directly applicable articles

Technical articles assigned to this context will appear here.